Originally Posted by SamOlson
Barry we have old 18'(?) MF offset disc that we use once in awhile when the weeds get too much for a toolbar.


They will churn up the soil for sure, especially if there is a little moisture in the ground.


Takes a little HP to pull one though if you work it deep.



We pull ours with an old 230hp(engine rated hp) Versatile 835.



I'll be going pretty deep. Probably make a couple of passes on that guy's hay field.

Roger on the moisture!

From what I can gather, a rule of thumb is 10hp per 1 foot of width on the offset disc.... 10' o/s disc = 100hp tractor to pull it.

Originally Posted by Ole_270
Turned a lot of ground with a 14' Miller offset behind a 7030 Allis a lot of years ago. They do pull fairly hard if digging deep. Not too good for finish work even if you flatten out the angle some.


I believe you are right for the finish work.

I have a ridged harrow that should finish it great, after the offset.

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

Molɔ̀ːn Labé Skýla!