I had one. I took it apart to work on the abysmal trigger pull. The receiver is made from two stamped halves riveted together. I figure they must assemble all the lockwork in one half, then rivet them together, because the thing is darn near impossible to reassemble. It required making custom slave pins and a reassembly sequence of Byzantine complexity. Put this part back in, but only half way, then put that part in just a little bit, move the first part farther in, then grab the third part......I finally got it back together, but it was a real struggle.
Never take one apart. You have been warned.
When the prices went through the roof for them, I found someone who wanted it a bunch more than I did. Don't miss it.
Last edited by natman; 10/25/20.
