A chain saw to cut out some bushes then a file to sharpen the chain and a wrench to tighten the chain. I then dug my motorcycle out of the shed and put a battery charger on it so it would start. Once done with that I took it for a short ride. Later in the afternoon I punched out to front sight base pins on an AR15 with a hammer and a punch and tapped an 8-32 thread into the front sight base. From there I used a file to shape the holes so I can get the front sight base back on and get it straight up and down instead of 2 degrees to the right. Tomorrow I'm driving to Brownells to get some more AR tools and parts that I decided I needed after taking off the front sight. Now I'm using a key board to tell you all how busy of day I had. It was a good day.

All in all I think SamOlson takes the prize for playing with big tools.

kwg

For liberals and anarchists, power and control is opium, selling envy is the fastest and easiest way to get it. TRR. American conservative. Never trust a white liberal. Malcom X Current NRA member.