Originally Posted by humdinger
Originally Posted by luv2safari
Are you trying to get the shotgun to shoot to the sights?

If you just want the barrels to shoot the same place you can put a wedge between the barrels about 1/2 the way that puts pressure upward on the center of the rifle barrel. That should lower its POI. It doesn't take much pressure to change it substantially. The Valmets have a movable wedge at that point, but the rifle barrel is below the shotgun, so the opposite adjustment applies.

[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]


Yes - trying to shift the shotgun pattern up 10 inches... or possibly bring the rifle down 10 inches


On the 24F with the rifle on top that's the best scenario, since all you need is a wedge between barrels pushing up slightly on the center of the rifle barrel.

Hunt with Class and Classics

Religion: A founder of The Church of Spray and Pray

Acquit v. t. To render a judgment in a murder case in San Francisco... EQUAL, adj. As bad as something else. Ambrose Bierce “The Devil's Dictionary”