I built this one 15 years ago. At the time I didn't have a UTV or I would have done it a bit different. It's 6x10, too short for a 4 seater (which I don't have). I wanted it to track with my pickup, not have inside wheel wells, and with the bed fairly low. I went with tandem 2000lb axles and 12" tires. The bed is only 22" high so it's easy to work with and the axles are the same width as a full sized pickup. If I was doing it again, I'd use slightly stronger axles and 13" tires for better wear. That would only raise the bed an inch or so. It weighs 1100lb and can haul more than 2500lb. Also, the sides all come off easily for hauling hay or other larger stuff.
The tires are about worn out and I'm considering buying 13" wheels and tires this time. I would have to block it up a bit and haven't really looked at the best way to do that.

[Linked Image from i.imgur.com]

“In a time of deceit telling the truth is a revolutionary act.”
― George Orwell

It's not over when you lose. It's over when you quit.