........... That's the route I took a few years ago when I put my Mod. 96 Swede sporter (small ring), into a Bell & Carlson stock with the aluminum bedding block. It already had a Timney trigger that was real nice except it would have required removing too much aluminum ( IMHO) from the section of bedding block right behind the trigger assembly. Got a Dayton Traister that fit in there with lots less Dremel work and I'm real happy with that one also. IME they are both nice units, the Timney was on there since about 1995 until I did the stock switch 4 or 5 years ago. I don't even know what kind of market demand there is for Mauser triggers anymore. Wouldn't be shocked if some Mauser aftermarket triggers get discontinued. Anyone know if Dayton Traister still lists one for small ring Mausers?
