Traded into a 700 and noticed one of the mount screws wasn't seated all the way down in the countersink.
Removed scope, tightened screw and bolt wouldn't move. Too long of a screw.
The rear screw is fine, very front is fine other than being a slotted head vs allen head like the others.
I am needing 2 screws in the .240 length range for both front holes.
Only other requirement will be the head need to be .191-.195 to fit down in the countersink. Those 2 different numbers are the head diameter of the current screws.
Older Burris mount for what it's worth.
Last edited by 10gaugemag; 07/17/22.
