You guys are correct.
While I was reworking my shims for the forearm I noticed it was solid on the barrel on the left side. I used a socket and sand paper to for more room and bolted it back up, now it’s bearing on the right side? As I kept fiddling with it the front screw stud could be drifted left to right pretty much with thumb pressure on it. On top of that there was a high spot on the back of the forearm near the receiver. I got everything looking centered and sanded, used a punch and a hammer to help it stay in place, tightened the forearm down and took it back to the bench. After 2 rounds for scope adjustment I fired 8 consecutive shots into just a shade over 1” at 107yds.
Thanks for the help.
