Remington 700 BDL SS 30-06 with jeweled bolt and 24” barrel. l bought this here about 2 years ago, put a Gre-tan firing pin assembly on it to replace the j-lock, a set of 1 inch Talleys in what look like lows, possibly ex-lows. It had a Leupold 3-10X40 on it with lots of room so I am guessing they are lows. Ran our standard 180 Partition load through it which did an inch and threw it in the safe until it went to AK to my son. Due to some unforeseen circumstances it never made the trip and it doesn’t stand to get much use here so I am going to move it. Just looking to basically get my $ back out of it including the firing pin assembly and the Talleys. Couple shined spots on the barrel and marks on the stock but it is a $100% solid rifle from when Remington was still doing it right.
$875 shipped to the lower 48. Your FFL must accept from a private individual or add on the $40 my guy charges.

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]

https://www.24hourcampfire.com/ubbt...-rem-700-stainless-30-06-24#Post16840127

Last edited by jdunham; 10/17/22.

NRA Life Member

~Molɔ̀ːn Labé Skýla~