Originally Posted by cumminscowboy
you should post pictures of the setup. I am very interested in how they are adding a zero stop to that scope. I am surprised they are able to do this. like others have said, to my knowledge it was send the scope in to zeiss first. (which was actually meopta) get a turret added, then kenton could sell you an etched turret. I wasn't aware they modified scopes too,

Received my scope from Kenton. So far so good. Mounted and sighted it in at 200yds. Dialed 3 separate times for 3,4 and 500 yard drops using a ballistic app. They were right on the money and scope returned to zero. Only time will tell if it holds up. Not planning to do tons of dialing, so thinking it should be fine.

I know some were interested in what the installation looks like. See pics below. With removable Zero Stop ring/pin removed, I have appx 2 and 1/2 full turns available on the dial. Only 1 with the ring/pin installed. I'll never need more than 1 turn with the cartridge/load I'm using.

[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]