HawkI is spot on. Perfect size for the N frame.
As to loads, it depends what you are needing, as the revolver is very flexible.
A grizzly protection load that I like is a stout charge of 296, magnum primer, with a 265 gr Cast Performance WFNGC. It clocks just over 1100 fps from my 4” M57 no dash, is very accurate. Never shot a grizzly, but was close a few years ago on a DIY caribou hunt in ANWR.
For 240-250 grain hard cast bullets, I like 17.5 gr/2400, standard primer. Jacketed bullets get 18 gr. I consider this my standard and most used load.
I will also add that I use and like very much a 4” 29-2, but admit that my love affair is with the Model 57s.
Last edited by GF1; 02/05/23.
