I have one. Great handling, mediocre trigger. I did have a failure to fire problem with it. It would strike the cartridge rim too far toward the edge - like almost OFF the edge! I ended up fixing it by JB Welding a .007 shim on the top of the breech bolt. This stopped the bolt from riding too high in the action. Essentially, just too much slop in it. There is a little bump on the front of the block , and that's where I put the shim. Apparently, some of them are just a bit too small. Not sure how the JB Weld will hold up, but there is no real pressure on it there. So far so good. About 100 rounds through it with no misfires and no function issues. It would shoot about 3/4" for 5 rounds, at 50, on a good day. Can't say I completely trust it yet, but it really does handle well. If you need any parts for it, they are darn hard to find. Most are unobtainable. The barrel CAN use a 10/22 barrel, but you need to cut another slot in it for the ejector.
