Picking up a new to me Rem 700 416 Rem mag. Sits in a HS precision stock and matte finish . Gun has a removable brake and a threaded cap as well. I’ve already picked up a Leupold VX3 1.5-5 illuminated 30mm tube for it. I’m taking it to get drilled and tapped for sights. Having him price out a set of after
Market sights with the wrap around front sight but also thinking just a factory set with a hood Would works as well. I’m thinking some kind of QD rings and bases. Leaning toward Talleys. Sound like a plan or should I stick with something else? Also should I get the scope base holes redrilled and tapped 8/40 for strength? Also like to hear thoughts on having an M16 extractor installed.
Thanks
Roy
Roy, I’ve been using Leupold QD base/rings for many years. My rifle produces 59+ ft/lbs. recoil, which is probably similar to your 416. They have never been a problem. I have a back-up scope already zero’d as well as iron sights. I wouldn’t think twice about going the same route again!
We (wife and I) drilled and tapped both of our rifles for larger screws. I think that they offer greater shear-strength….but also apply blue Lock Tite to all screws, base to receiver contact, as well as in the scope saddles! I can’t swear that they are necessary…..but, it darn sure can’t hurt! memtb
