That's excellent info. I settled on 51gr of believe it or not IMR4350. I know its not ideal but I wanted to see what I could do to use up some of the rust dust powder from a metal can on something that I only use for occasional pigs or yote. I am ok with 1900fps. I will switch to 232 oryx and a faster powder at some point.
as a side note I probably would not push it that high if it was not a 98 action but no primer flattening at 51gr. Very minimal flattening as I went up to 52gr. It could be safely pushed further but I wont
Last edited by ktk120; 05/22/23.
