Home Forums Hunting & Shooting BPCR Sharps 50/90

Well, I think I finally got the sights regulated where they are supposed to be in order to get the ladder to regulate. Basic gist is about 5" high at 100 yards, so you 6 O'Clock hold it on targets. Well, today was overcast with some snow flurries.



I used Montana Bullet Works 700 grain Gov't bullet, 110 grains of Swiss 1.5F in Starline brass with CCI200's.



1st three went left quite a bit. I got out the hammer and punch and drifted the front sight to the left.







Shot the next 3...







Well, I felt good about the windage, so I fired another 3 just to make sure..







Well, now I was wondering what was going on, cause I should have been higher on elevation.. I cranked off another 3 rounds and had them all at the bottom of the plate.



So I got out the file started filing..



When I think I had enough, I fired three. Didn't clean between, just long enough to eject the empty and hammer another in the chamber.







I shot this, packed my bags and called it good enough for today.







Some perspective. 35 Whelen and 308 on the flank...