Ohhhh boy am I dangerous now. It is V3.4 and it's been interesting comparing my pet loads with the program.
I found that I've been pretty good about controlling pressures, which is good news. Some rounds I found to be very close with respect to QL's estimated velocities and my chronograph, but others are off a bit, especially in the larger cartridges. I am hoping Ken H. can help out when I get to that point. I read the post regarding the weighting factor and I think that will help some. I need to spend a little time verifying some of my prior results before I jump into that whole hog.
I also entered loading results from the manuals into QL just to check results and consistency. In most of the magnums, the manual velocities were a little higher than QL results. I don't know if it is manufacturer's bias, or conservatism in QL, or both.
What's going to get a bit expensive is discovering other powders that may produce better results than what I've been using for some rounds.
Tell the Governor, I said ouch.
