O/T-
Start by taking the open end through first keeper,rivets toward stock through outside of the rear swivel [away from stock], through both keepers, through upper swivel the inside of stock, bring it down through both keepers to about 80% from the toe swivel. If I recall there are two keepers. At this point the open end of sling is free, waiting for the proper length to determined the for the arm loop. Go through upper keeper only temperarly secure the open end with leathe thong to the sling [should be unfinshede or raw side. A cross X formed by the last four holes of of the thong is preferable, with loose ends tucked inside X for . I suggest you determine length of loop, by moving the four holes up & down the inside determined from different shooting positions. Remember both keepers should be on each side of sling, bottom one outside the X; upper one inside of anchor point. The claw end is now positioned in sling towards muzzle. When firing with arm through loop, the claw must be floating free. Upper keeper pulled back against arm for stability. One fine durable usable product. Just stay with it till comfortable Sorry for extreme wordy reply. Not a gunwriter.
