Happily using H4350 to get 3340 fps from a 100 gr TSX and a 24" Remington barrel. Two very dead mulies with it over the past three years. I missed a shot at a third mulie two years ago. My fault entirely. I could load hotter, but this load shoots fine and does what it needs to do.
The bullet can be quite accurate and is certainly very effective. I'd show you a recovered bullet, but... Both of 'em are buried in the dirt where they ended up after killing deer!
Last year's deer was hit at only about 30 yards and the bullet just unfolded his heart. Instant one-shot drop. Very impressive.
If you haven't worked much w/Barnes bullets - they're soft - and copper fouling can still be a problem, particularly with rough factory barrels. I clean the bore more frequently when using Barnes bullets, because it seems there's always copper fouling. I'll put up with that for the performance - they shoot well and do bad things to good deer!
Regards, Guy
