I use four basic loads in my M600:
1) Small Game / Plinker 158gr. SWC with 31grs. of 3031 at 1550fps. A crude approach to a reduced load that burns a little dirty (not enough pressure), but shoots to POA of standard load at 25yds.
2) General Purpose 250gr. Speer Spitzer with 51grs. of 3031 at 2300fps. A bit under maximum, but plenty for many uses and cheap and accurate.
3) More Power 250gr.Nosler Partition with 54grs. of Accurate 2230 at 2500fps. A low pressure, but high performance combination. I get a little better than MOA, but this load is not fun off the bench in my little 6lb. carbine.
4) .35 Rem. Copycat 220gr. Speer with 45.8 of Reloader 7 at 2200fps. This one out shoots the .35 Rem. levers both in fps and accuracy; but due to the light load is not a tack driver When using the ghost ring sight it still shoots better than me beyond 100yds.
Hope these are of some interest. Please, check your manuals and develop loads for your rifle as I may not know what I am talking (typing) about.
Fireplug
