The first time I tried using 3031 it was in a 45-70 cartridge. I started with a light load and took the first three cartridges loaded out to try (about 2 weeks ago). First one went POP. Primer detonated but NOT the powder. I cleared the bore and tried again. POP. SAME RESULT! Only primer - no powder ignition. This is from a case about half full of 3031 (no filler). I pulled the last bullet and dumped the charge. I touched a match to it to test whether I had a bad can of powder (just bought new and sealed). The load burned just like I would expect it to. BUt I am not going to rely on a powder that wont ignite with a standard large rifle primer two out of two tries. I have used hundreds of other primers from this lot and not had a single misfire.


"Delight yourself in the Lord and He will give you the desires of your heart." Psalm 37, verse 4.


"The lazy do not roast any game, but the diligent feed on the riches of the hunt." Proverbs 12:27