Had a AD at the range last week.
Rifle - ULA M28 with a brand new Timney trigger installed by Mel.
Was bore sighting and loaded a round to send down range. Pulled trigger and nothing, oops safety on. Reached up with right hand and flicked it to fire, BOOM.
On this and I believe all ULA/NULA�s you can move the safety lever from fire to the middle position to unlock bolt and unload BUT���
If you move it this middle position from the fire position and try to fire the rifle you will feel the shoe move and hence the sear move, when you now push the safety forward the sear is already released and BANG the firing pin drops.
I know it seems like quite a sequence but it can happen.
To repeat--
If you move the safety from fire but don�t bring it all the way back to safe and somehow the trigger gets touched and you then move the safety to fire, it will FIRE.
Can other owners of NULA/ULA rifles try this before I do or say anything.
Thanks!
Dave
