After devcon has cured, I knocked off the high/sharp spots with some files (big one for the flats and small needle for the curves and hard to reach areas)
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock001.jpg)
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock004.jpg)
Done with painting--4 coats of Rustoleum textured (Dark Pewter) paint...
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock006.jpg)
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock011.jpg)
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock012.jpg)
Barrel channel opened up to accomodate the GMHT barrel, left unpainted till after bedding...
![[Linked Image]](http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock010.jpg)
Barreled action in...
[img]
http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock014.jpg[/img]
[img]
http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock015.jpg[/img]
[img]
http://i13.photobucket.com/albums/a286/jmsdad/Flip%20flop%20pad%20install/rrstock019.jpg[/img]
