Was just reading this and was wondering if this could be part of the problem I saw this weekend. Was with a guy shooting a Bushmaster Predator using some reloads that I had loaded for him. The rifle would not reset the trigger it appeared that the bolt was not cycling far enough to get the hammer to catch on the disconnect. The bolt would pick up another round but the trigger would not be reset. Could cycle the bolt by hand and the trigger would reset. Even had it to double fire a few times...the load that I had loaded was 22gr/H335 68Gr/HPBT CCI400. Could it be that the bolt was not cycling far enough back to make the trigger operate properly?
