Home Forums Hunting & Shooting Ask The Gunwriters Mr. Barnsness; about sizing virgin brass

Print Thread

Hop To

Re: Mr. Barnsness; about sizing virgin brass gmsemel #6346448 03/28/12
Joined: Apr 2005 Posts: 398 NM P PepeLp Campfire Member
PepeLp Campfire Member P Joined: Apr 2005 Posts: 398 NM	I run new brass through a Lee collet die to make sure the necks are round. Then I debur the mouths and load. It's all in the reflexes.

GB1

Entire Thread
Title	Posted By	Posted
Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	mjbgalt	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	deflave	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	mjbgalt	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	greydog	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	nifty-two-fifty	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	mathman	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	bellydeep	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	bellydeep	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	gmsemel	03/29/12
Re: Mr. Barnsness; about sizing virgin brass	PepeLp	03/29/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/29/12
Re: Mr. Barnsness; about sizing virgin brass	FlyboyFlem	03/29/12
Re: Mr. Barnsness; about sizing virgin brass	22250rem	03/30/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	04/09/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	mathman	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	1minute	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	03/28/12
Re: Mr. Barnsness; about sizing virgin brass	richardca99	04/09/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Con	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	michiganroadkill	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Con	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Azar	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	mathman	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	04/10/12
Re: Mr. Barnsness; about sizing virgin brass	Mule Deer	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	FTR_Shooter	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	Take_a_knee	04/17/12
Re: Mr. Barnsness; about sizing virgin brass	Con	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	Azar	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	Azar	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	mtnfisher	04/12/12
Re: Mr. Barnsness; about sizing virgin brass	Spotshooter	04/12/12
Re: Mr. Barnsness; about sizing virgin brass	DakotaDeer	04/12/12
Re: Mr. Barnsness; about sizing virgin brass	zxc	04/12/12
Re: Mr. Barnsness; about sizing virgin brass	Con	04/12/12
Re: Mr. Barnsness; about sizing virgin brass	Prwlr	04/14/12
Re: Mr. Barnsness; about sizing virgin brass	Ackleyfan	04/14/12
Re: Mr. Barsness; about sizing virgin brass	FTR_Shooter	04/14/12
Re: Mr. Barnsness; about sizing virgin brass	mtnfisher	04/11/12
Re: Mr. Barnsness; about sizing virgin brass	Dirtfarmer	04/12/12

Moderated by RickBin

Link Copied to Clipboard

AX24