Originally Posted by rockchuck828
Originally Posted by Fotis
anything will help


O.K. here goes....EVERY manufacturer be it guns, automobiles etc. all have at least one bastard child. Toyota makes the FJ cruiser, Honda makes a Ridgeline, GM makes too many to list.

In gun's a great example is Remington, first it was the J-Lock on the bolt shroud followed by the POS X-Mark Pro trigger, either debacle would have put a smaller company into bankruptcy.

Weatherby's biggest debacle (bastard child etc.) in their history is the 30-378.........dont fight it either re-barrel to a better chambering or buy a different rifle with better chambering.


uhh, ok..

Fotis, I maxed out @ around 100 grains of retumbo, seated at 3.8" GM215M primers.I was getting decent accuracy and right at 3000 fps. Been meaning to try some other powders/depths but shelved it to work with other rifles.

Edit to add, if you plan to seat the bullet out and single feed, make sure to decrease the charge acordingly, pressure goes up fast.

Last edited by rosco1; 08/28/12.