There are many options. 1st of all, any competent gunsmith can remove the sticky pad and install a new one of your choice. Sims will give you new pads for free if you want to go back with the LS.
The easiest fix is to just cut the pad off leaving the hard plastic backer glued on, sand the plastic flat, then buy a pair of $2 flip flops, trace out the stock on the flip flop, cut the ff a little larger, epoxy it on, tape the stock and plastic to the ff line, sand with a belt or orbital until flush, then round the back edge of the ff with a sand block until you like the look. The negative is you'll lose about 1/4" lop, the positives are that it looks nice, works, and its dirt cheap.
Loder
There you go.....
Casey
