|
Joined: Nov 2011
Posts: 2,387
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2011
Posts: 2,387 |
I've got a project '03 Springfield that I'm working on and recently picked up a pristine set of Buehler rings and a base for it. Now I need to get it drilled and tapped. I've got a very knowledgeable gunsmith trying to convince me that I'm going to regret mounting the Buehler as they tend to come loose over time and don't hold up as well as the Redfield system. The Springer is chambered in 35 Whelen which he says will give the Buehler a pretty good pounding. Have any of you guys experienced this issue with Buehler mounts and rings? Do they hold up well? Do I need to be concerned? I really like the look, feel, and weight of the Buehler and I love the vintage look with my Weaver K4. I'm willing to move to a Redfield but only if I can find a vintage JR with rings. But I don't want to.
|
|
|
|
Joined: Jun 2006
Posts: 38
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Jun 2006
Posts: 38 |
IMHO, properly installed Buehler's hold up as well as the Redfield type system but you need to follow the supplied instructions on removing the shims from the rings to compensate for variances in scope tube size & getting the bottom of both rings flat against the base. If you have rings that were previously fitted to a different scope or if the shims are missing the odds of getting a proper fit are not good.
It always tickled me that at the bottom of the instructions there was a comment from Maynard Buehler that said "when all else fails, follow the instructions" so I'm assuming that not everyone did.
FYI Weatherby used to picture a lot of their rifles & scopes mounted with Buehler bases & rings.
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Properly set up, screws tight, Buehler ring system is solid, has stood the test of time.
I'm not sure what the smith in question is thinking, what his experience has been. Would like to hear his reason for not liking Buehler.
DF
|
|
|
|
Joined: Nov 2011
Posts: 2,387
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2011
Posts: 2,387 |
Thanks guys.
The smith says he's seen several Buehler mounts come in that just won't stay tight and guys can't hold zero with them. Guess they didn't read the directions. I don't have directions either. He says that he'll mount the Buehler but if I want to switch to something else someday it wouldn't be easy and or very cost effective. I'm thinking I might sell this setup and just go with the Redfield. But I don't want to right now.
|
|
|
|
Joined: Jun 2006
Posts: 38
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Jun 2006
Posts: 38 |
pdcrig
If you will PM me with an E-Mail address I will scan & send you a copy of the instructions for installing Buehler split rings.
Basically you need to remove the layers of shim stock (spacer w/16 layers .002" thick) from the front ring until the spud of the ring that fits into the base measures 0.499" with the ring clamped onto the scope tube (slot @ the bottom of the ring will be 3/64") & assuming the scope tube is where the rear ring sets is the same diameter as the front you remove the same # of shims from the rear ring.
Note that front & rear ring halves & shims are not interchangeable so don't get them mixed up (why used Buehler rings are a gamble).
1" Buehler rings were made to fit scope tubes from 1.002" to 0.993". Properly installed they are a very functional & nice looking scope mounting system.
Last edited by shotgunner; 12/06/16.
|
|
|
|
Joined: Jan 2004
Posts: 3,366
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2004
Posts: 3,366 |
IMHO, properly installed Buehler's hold up as well as the Redfield type system but you need to follow the supplied instructions on removing the shims from the rings to compensate for variances in scope tube size & getting the bottom of both rings flat against the base. If you have rings that were previously fitted to a different scope or if the shims are missing the odds of getting a proper fit are not good.
It always tickled me that at the bottom of the instructions there was a comment from Maynard Buehler that said "when all else fails, follow the instructions" so I'm assuming that not everyone did.
FYI Weatherby used to picture a lot of their rifles & scopes mounted with Buehler bases & rings. Not just Weatherby, Maynard's advertising back in the day showed a lot of large bore custom stuff with his mounts. Like 600 Nitro H&H doubles and other top fuelers.
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
IMO, the problem is not setting them up right.
If someone screws up the shims, has less than tight grip on the scope, problems may occur.
My experience with Buehler has been stellar.
DF
|
|
|
|
Joined: Nov 2013
Posts: 29,066 Likes: 28
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 29,066 Likes: 28 |
There are other mounts that resemble the slick-looking Buehlers, such as Conetrol. Might save some trouble.
What fresh Hell is this?
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Conetrols are great, less complicated and probably look even better than Buehler.
You gotta keep the matched parts matched, as they're manufactured in sets.
DF
|
|
|
|
Joined: Sep 2006
Posts: 23,678 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,678 Likes: 5 |
IMO, the problem is not setting them up right.
If someone screws up the shims, has less than tight grip on the scope, problems may occur.
My experience with Buehler has been stellar.
DF This^^^.............I've had several sets of Buehler rings on guns over the years with a lot more recoil than an '06, with absolutely no issues & have installed them on a fair number of other guns. In fact, I still have one set that's been on a gun continuously since the mid-'80 & it's been all over North America & it's never moved. MM
|
|
|
|
Joined: Sep 2006
Posts: 23,678 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,678 Likes: 5 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM True. But if one pays attention, is careful to keep matched parts together and carefully assembles those parts, they'll be there rock solid indefinitely. DF
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM True. But if one pays attention, is careful to keep matched parts together and carefully assembles those parts, they'll be there rock solid indefinitely. DF Conetrol is back in business as well. DF I found a Howa Mark V 240 weatherby 9 lug with a 26" barrel along with 3 boxes of the yellow box ammo for 750. It has Beuhler rings and bases and a bubble pack Bushnell mounted on it. Fair condition is 750 out the door for everything. What do you think?
|
|
|
|
Joined: Dec 2002
Posts: 32,262 Likes: 6
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2002
Posts: 32,262 Likes: 6 |
I'd rather have a Buehler mount than a Redfield/Leupold turn-in style.
Is your mount the standard style with the two windage screws on the back or is it a micro-dial style that has both windage and elevation built into the rear?
Micro-dials are a little tricky the first time you use them, but the standard style bases aren't any more difficult to install or use than any other common mount.
|
|
|
|
Joined: Mar 2007
Posts: 2,712 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Mar 2007
Posts: 2,712 Likes: 2 |
This! Just stay with the Buehler mounts & set them up correctly. JMHO
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM True. But if one pays attention, is careful to keep matched parts together and carefully assembles those parts, they'll be there rock solid indefinitely. DF Conetrol is back in business as well. DF I found a Howa Mark V 240 weatherby 9 lug with a 26" barrel along with 3 boxes of the yellow box ammo for 750. It has Beuhler rings and bases and a bubble pack Bushnell mounted on it. Fair condition is 750 out the door for everything. What do you think? Howa makes the Vanguard. MkV has been made in Japan, not sure by whom. A .240 MkV is worth more than $750 if in decent shape. The other stuff is just lagniappe. I'd jump on that deal if I was in the market. DF
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM True. But if one pays attention, is careful to keep matched parts together and carefully assembles those parts, they'll be there rock solid indefinitely. DF Conetrol is back in business as well. DF I found a Howa Mark V 240 weatherby 9 lug with a 26" barrel along with 3 boxes of the yellow box ammo for 750. It has Beuhler rings and bases and a bubble pack Bushnell mounted on it. Fair condition is 750 out the door for everything. What do you think? Howa makes the Vanguard. MkV has been made in Japan, not sure by whom. A .240 MkV is worth more than $750 if in decent shape. The other stuff is just lagniappe. I'd jump on that deal if I was in the market. DF They were made by Howa and unfortunately not made by them anymore. I might have to peruse that one again and make a project out of it. The old guy really hunted this one, it has warrior scars on the stock and the bluing is not great. His wife brought it in on consignment. page down to the bottom for Howa information
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Just looked it up on line. Howa did make the Japanese MkV, you were right.
The Jap MkV's are as good as the German or US from what I've read.
DF
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
Conetrols are great..............but can definitly be tricky to get installed correctly for a novice or a 1st time user.
MM True. But if one pays attention, is careful to keep matched parts together and carefully assembles those parts, they'll be there rock solid indefinitely. DF Conetrol is back in business as well. DF I found a Howa Mark V 240 weatherby 9 lug with a 26" barrel along with 3 boxes of the yellow box ammo for 750. It has Beuhler rings and bases and a bubble pack Bushnell mounted on it. Fair condition is 750 out the door for everything. What do you think? Howa makes the Vanguard. MkV has been made in Japan, not sure by whom. A .240 MkV is worth more than $750 if in decent shape. The other stuff is just lagniappe. I'd jump on that deal if I was in the market. DF They were made by Howa and unfortunately not made by them anymore. I might have to peruse that one again and make a project out of it. The old guy really hunted this one, it has warrior scars on the stock and the bluing is not great. His wife brought it in on consignment. page down to the bottom for Howa information Condition will determine the price. If it's showing a lot of wear, I'd check out the latest Blue Book. Mine is at home, I'm at the office. DF Edited to add, if it shows wear, high speed rounds like the .240 can be hard on the bore. I have a Hawkeye and would check the bore if I was looking to buy that gun.
Last edited by Dirtfarmer; 12/07/16.
|
|
|
|
Joined: Nov 2010
Posts: 37,258 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,258 Likes: 14 |
37th Blue Book, the Mark V Deluxe has to be down in the 70% range to drop to $800. 70% is pretty low condition, showing a lot of wear.
DF
|
|
|
|
307 members (1Longbow, 160user, 1badf350, 06hunter59, 222Sako, 12344mag, 26 invisible),
10,040
guests, and
1,063
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,340
Posts18,546,401
Members74,060
|
Most Online21,066 May 26th, 2024
|
|
|
|