Home Forums Reloading Big Game Rifles RL26 Recipes

Anyone loading 150s in the 7 SAUM or 280 AI with '26?

Does reloader 26 actually exist? I have been looking for some for 150's in my 270 win, and cant find any in my neck of the woods.

Or mine.........

aceman2101,

Where are you in Montana? I've purchased all of mine from stores in Helena and Big Timber. In fact I was in the Helena store last week and they had some, but I didn't buy it since have enough for a while.

In my limited experience RL26 works better with heavy bullets in a given caliber. I loaded some Hornady 154 Interlocks for my 280AI and didn't get any better velocity or accuracy than using H4831. My buddies 280AI cut with the same reamer shot 160's and 175 bullets much better and had good velocity using RL26.

Berger data showed 26 as giving highest velocity with a 140 in the 6.5 Creedmoor.

That's what I'm thinking but I believe I'll give it a tray anyway.

Aceman201, I gave up and ordered some R26 from Grafs, If you order enough powder then the Hazmat fee is a wash compared to local GS prices per lb.. At least it is here.

What kind of speeds are you looking for? I'm shooting 160 grain Accubonds in my 7 SAUM with a 22" barrel. Magpro(half a grain below book max) gives me 2930fps. IMR4350(at book max) gives me around 2850fps. RL22 is right there with these powders, velocity, wise. Accuracy is great with all of these powders.

It is a LITTLE bit faster than RL25. My data shows 1-2 grains LESS than RL25

Thanks. Do you mean 1-2 grains less than R25 to get the same velocity with 150s in the 7 SAUM?

I'd like to get at least 3,000 with the 150 Scenars. I can get excellent accuracy and 3050+ with IMR 7977 (23" bbl) but there's no "book" data and the load appears a little hot.

That speed with the 150's seems doable. I can push a 168 Berger at 2950 using 60.5 grs of RL26

Just seeing RL-26 for 140s in the 260... Did I miss it?


RL26, 6.5 Creedmoor, 2977 with the 135 Classic Hunter... G7 .303. That oughta work.

I worked up some 26 loads for 150 grain BT's in my AI. Had good results, but it didn't beat out my rifle's preferred load using RL-19. Worked jam up for me with my 270 and 150 grain NF's though.

Boomer: I did not look at the 135...interesting!

Picked up a pound of R26 yesterday

Muledeer said to use Alliants 270 data and work up

yes

Cartridge : 7 mm Rem SA Ultra Mag
Bullet : .284, 150, Nosler PART SP 16326
Useable Case Capaci: 65.785 grain H2O = 4.271 cm³
Cartridge O.A.L. L6: 2.820 inch = 71.63 mm
Barrel Length : 24.0 inch = 609.6 mm
Powder : Alliant Reloder-26

Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !

Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-10.0 90 58.50 2765 2546 39782 11766 98.6 1.407
-09.0 91 59.15 2798 2608 41238 11872 98.9 1.383
-08.0 92 59.80 2832 2671 42754 11970 99.2 1.360
-07.0 93 60.45 2866 2735 44334 12060 99.5 1.337
-06.0 94 61.10 2899 2799 45977 12142 99.7 1.314
-05.0 95 61.75 2932 2864 47691 12215 99.8 1.292
-04.0 96 62.40 2966 2929 49478 12280 99.9 1.270
-03.0 97 63.05 2999 2995 51339 12336 100.0 1.249
-02.0 98 63.70 3032 3061 53280 12382 100.0 1.228
-01.0 99 64.35 3064 3128 55305 12425 100.0 1.208 ! Near Maximum !
+00.0 100 65.00 3097 3194 57420 12466 100.0 1.188 ! Near Maximum !
+01.0 101 65.65 3129 3262 59627 12506 100.0 1.168 ! Near Maximum !
+02.0 102 66.30 3162 3329 61934 12545 100.0 1.148 ! Near Maximum !
+03.0 103 66.95 3194 3397 64344 12583 100.0 1.129 !DANGEROUS LOAD-DO NOT USE!
+04.0 104 67.60 3226 3466 66860 12620 100.0 1.111 !DANGEROUS LOAD-DO NOT USE!
+05.0 105 68.25 3258 3535 69475 12655 100.0 1.092 !DANGEROUS LOAD-DO NOT USE!

Results caused by ± 3% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 3% relative to nominal value:
+Ba 100 65.00 3146 3298 61949 12276 100.0 1.153 ! Near Maximum !
Data for burning rate decreased by 3% relative to nominal value:
-Ba 100 65.00 3040 3078 53191 12666 99.9 1.225




Cartridge : .280 Ack Imp
Bullet : .284, 150, Nosler PART SP 16326
Useable Case Capaci: 67.127 grain H2O = 4.358 cm³
Cartridge O.A.L. L6: 3.330 inch = 84.58 mm
Barrel Length : 24.0 inch = 609.6 mm
Powder : Alliant Reloder-26

Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !

Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-10.0 88 58.50 2721 2466 38489 12080 98.3 1.420
-09.0 89 59.15 2754 2527 39871 12198 98.6 1.395
-08.0 90 59.80 2787 2588 41309 12309 98.9 1.372
-07.0 91 60.45 2821 2650 42805 12411 99.2 1.349
-06.0 92 61.10 2854 2712 44361 12505 99.5 1.327
-05.0 93 61.75 2887 2775 45981 12591 99.7 1.305
-04.0 94 62.40 2919 2839 47667 12669 99.8 1.283
-03.0 95 63.05 2952 2903 49422 12737 99.9 1.262
-02.0 96 63.70 2985 2967 51251 12797 100.0 1.241
-01.0 97 64.35 3017 3032 53156 12848 100.0 1.221
+00.0 98 65.00 3049 3097 55141 12894 100.0 1.201
+01.0 99 65.65 3081 3162 57212 12938 100.0 1.181 ! Near Maximum !
+02.0 100 66.30 3113 3228 59372 12982 100.0 1.161 ! Near Maximum !
+03.0 101 66.95 3145 3295 61627 13025 100.0 1.142 ! Near Maximum !
+04.0 102 67.60 3177 3361 63969 13066 100.0 1.124 ! Near Maximum !
+05.0 103 68.25 3208 3428 66399 13106 100.0 1.105 !DANGEROUS LOAD-DO NOT USE!

Results caused by ± 3% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 3% relative to nominal value:
+Ba 98 65.00 3100 3201 59467 12699 100.0 1.165 ! Near Maximum !
Data for burning rate decreased by 3% relative to nominal value:
-Ba 98 65.00 2991 2980 51087 13076 99.8 1.239

Fotis: Thanks! I owe you one.

nada