|
Joined: Jul 2003
Posts: 1,172 Likes: 3
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2003
Posts: 1,172 Likes: 3 |
This Fall, I was afforded the opportunity to buy a used D’Arcy Echols Classic rifle chambered in .270 Winchester. The rifle had been built in 1995 and the previous owner (who had commissioned the rifle) kept it in pristine condition. Despite the inherent sexual preference of the chambering, I made an offer that the owner accepted. D’Arcy was kind enough to send me his records on the rifle and we talked about the rifle’s history at-length. This rifle was built on a trued 1909 Argentine and I believe that the bottom metal was designed by Tom Burgess. The scope is mounted using D’Arcy’s own scope mount system which is as rock-solid as they come. This rifle was the first Classic to receive the I-beam treatment to reinforce the forend and prevent the wood from migrating. The rifle does not have pillars, it having been built before D’Arcy began installing them as a matter of course. The rifle arrived in the midst of our deer season so I did some very quick load development to try to get it in the field. A near-maximum charge of H-4831 and 130gr. TTSXs produced three-round groups of just under ½” at 100 yards with the bullets seated .050” off the lands. Good enough for now. As nice as this rifle is, I don’t keep safe queens so I took it out on several hunts both locally and elsewhere in the Southeast. I’d already put several does in the freezer by the time the rifle arrived and never saw a mature buck during the rut so I didn’t get an opportunity to use it on deer, though I did shoot a hog with it at a friend’s property in Florida. I’ve finally cleared my plate enough that I will soon be able serious load development with the rifle, starting with 150gr. Partitions and something like a 140gr. SST. The idea is to have a good load for elk and other larger game as well as something suitable for the smaller bodied deer that I hunt at home. I’m headed to Alberta on mule deer hunt in 2018 and this rifle will likely make the trip. Hope that you enjoy the photos.
|
|
|
|
Joined: Jan 2005
Posts: 3,946 Likes: 26
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2005
Posts: 3,946 Likes: 26 |
The deer and elk are in trouble now !
Phil Shoemaker Alaska Master Guide, Alaska Hunter Ed Instructor FAA Master pilot www.grizzlyskinsofalaska.comAnyone who claims the 30-06 is not effective has either not used one, or else is unwittingly commenting on their marksmanship.
|
|
|
|
Joined: Mar 2008
Posts: 2,965
Campfire Regular
|
Campfire Regular
Joined: Mar 2008
Posts: 2,965 |
Sweet! Congratulations! I wonder why the original Argentine bottom metal wasn't retained?
|
|
|
|
Joined: Apr 2011
Posts: 15,360 Likes: 10
Campfire Ranger
|
Campfire Ranger
Joined: Apr 2011
Posts: 15,360 Likes: 10 |
Congrats! That's a beautiful rifle. Doesn't get any nicer than that.
Semper Fi
|
|
|
|
Joined: Jun 2004
Posts: 3,123 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2004
Posts: 3,123 Likes: 1 |
that rifle looks like a very nice acquisition to enjoy using.
|
|
|
|
Joined: Jul 2003
Posts: 1,172 Likes: 3
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2003
Posts: 1,172 Likes: 3 |
Appreciate all of the kind words.
I did make one error: the bottom metal is not Burgess' but rather was from a batch that Echols had made for use on his rifles (I can't remember who made them). As for why he didn't use the original 1909 metal, I suspect it was to ensure the correct geometry for the cartridges he intended to use. I've spent some time in his shop when he was doing feed work and he is a big proponent of starting out with the right geometry in the first place rather than trying to adapt something else to work. The trigger bows on these units were also left essentially square so that they could be machined/filed to the desired shape.
|
|
|
|
Joined: Jun 2001
Posts: 3,320
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2001
Posts: 3,320 |
Rolly
|
|
|
|
Joined: Jul 2013
Posts: 598
Campfire Regular
|
Campfire Regular
Joined: Jul 2013
Posts: 598 |
What a rifle!!! Absolutely magnificent.
kd
|
|
|
|
Joined: May 2004
Posts: 2,676
Campfire Regular
|
Campfire Regular
Joined: May 2004
Posts: 2,676 |
Absolutely top rate rifle, congrats on getting it. I am curious on what it weighs as it sits, if you have a chance to put it on a scale. thanks
|
|
|
|
Joined: Oct 2000
Posts: 30,296 Likes: 3
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,296 Likes: 3 |
Freaking spectacular.
What's the barrel length?
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Jan 2004
Posts: 10,915
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2004
Posts: 10,915 |
What a Dream! So happy to know this rifle will be hunted.
|
|
|
|
Joined: Mar 2010
Posts: 2,716
Campfire Regular
|
Campfire Regular
Joined: Mar 2010
Posts: 2,716 |
Beautiful rifle.
1/2" with 130 TTSX's, there is no need to search further.
Congratulations.
|
|
|
|
Joined: Mar 2008
Posts: 3,515 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2008
Posts: 3,515 Likes: 1 |
On the bottom metal, it looks like a 1909 reworked by Tom. The units Echols had made were for short magnums ( 338 etc ). The internal dimensions of a 1909 box are perfect for a 270. The original box is a little short so Tom extended the box in the front ever so slightly. Burgess made a new floorplate as well which this rifle appears to have. My vote: Thos M Burgess.
“Perfection is achieved not when there is nothing more to add, but when there is nothing left to take away”. Antoine de Saint-Exupery. Posted by Brad.
|
|
|
|
Joined: Jul 2003
Posts: 1,172 Likes: 3
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2003
Posts: 1,172 Likes: 3 |
I'll try to answer all of the questions: Barrel length: 24" Weight: 8 pounds, 15.8 ounces scoped (which shocked me, I would have guess under 8 based on the way the gun carries). Bottom metal: Rick (good meeting you at SCI) No, it's definitely not a Burgess-- I spoke to D'Arcy this afternoon. It was the first unit of a run made by Robbins & Lawrence in Ft. Collins, Co to Echols' specs. The ID length of this mag box is 3.400" which is longer than the 1909 doesn't require the extension conversion that Burgess performed. I have one of these units that I bought from D'Arcy for a 35 Whelen that I'm building for myself. Here are a couple more photos that I pulled off my phone: A shot of the I-beam in the forend A skull that I found while still hunting with this rifle One of the 100-yard targets
|
|
|
|
Joined: Jul 2007
Posts: 24,665 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2007
Posts: 24,665 Likes: 6 |
WWP53D
|
|
|
|
Joined: Apr 2011
Posts: 12,231 Likes: 11
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2011
Posts: 12,231 Likes: 11 |
Beautiful rifle... Congrats !
|
|
|
|
Joined: Mar 2007
Posts: 9,097
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,097 |
Appreciate all of the kind words.
I did make one error: the bottom metal is not Burgess' but rather was from a batch that Echols had made for use on his rifles Echols BM is still more or less based on the Burgess, but with added improvements and refinements. The Jasper Raeburn/Joe Zoofall M98 shrouds Echols uses, are the best shrouds bar none! the machining and finish is impeccable. - I didn't regret one bit the money spent on buying some. On the bottom metal, it looks like a 1909 reworked by Tom......The internal dimensions of a 1909 box are perfect for a 270. To me the bow looks more like the geometry of the Burgess design used by Echols. https://echolsrifles.com/pages/classic-standardFrom my experience of having a top grade .270win 1909 built (right on par with Echols stds) I wouldn't call orig 1909 box dimensions ideal for .270win ....not at all. Even some of the new manufacture BM for mausers leaves something to be desired in that department. eg; I wouldn't use Wiebe BM because in my metal career opinion and my smiths opinion, they are a sub-standard item for a really top flight rifle. I don't even consider people like Wiebe as being in the absolute top tier of custom gunmakers (I've just dented some egos no doubt) especially after he personally described some of the crappy machining stds he uses on rifles.. But people who know no better know no different. The smith I used also didn't like Blackburn and neither does Echols, but if the customer insisted ,my smith would then alter-rebuild the Blackburn to his higher std. He has also used mauser BM supplied by Echols.....I was also looking at building the rifle using Burgess QD rings we had on hand, in his technical view opinion there were some upgrade-rebuilding processes he wanted to apply to deal with some shortcomings. Thats how far the best std. of gun building has come...but most of the tech./funct. improvements are subtle and visually unnoticeable to many people, hence why some might question its increased cost, value, or relevance.
-Bulletproof and Waterproof don't mean Idiotproof.
|
|
|
|
Joined: Feb 2014
Posts: 1,126
Campfire Regular
|
Campfire Regular
Joined: Feb 2014
Posts: 1,126 |
"Never miss the opportunity to shut the f$%K up." Colonel Hopewell.
|
|
|
|
Joined: Aug 2009
Posts: 96,167 Likes: 4
Campfire Oracle
|
Campfire Oracle
Joined: Aug 2009
Posts: 96,167 Likes: 4 |
Life Member SCI Life Member DSC Member New Mexico Shooting Sports Association
Take your responsibilities seriously, never yourself-Ken Howell Proper bullet placement + sufficient penetration = quick, clean kill. Finn Aagard
Ken
|
|
|
|
Joined: Jul 2003
Posts: 1,172 Likes: 3
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2003
Posts: 1,172 Likes: 3 |
Here is the one photo that I have of my example of this run of bottom metal, taken when I was contouring the bow in my mill. As you can see from the right side, it comes very much without contour and must be milled/filed into shape.
Last edited by Woodhits; 04/18/17.
|
|
|
|
524 members (1_deuce, 1936M71, 219DW, 260Remguy, 1OntarioJim, 01Foreman400, 57 invisible),
1,702
guests, and
1,223
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,108
Posts18,522,700
Members74,026
|
Most Online11,491 Jul 7th, 2023
|
|
|
|