|
Joined: Jun 2001
Posts: 19,111 Likes: 6
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jun 2001
Posts: 19,111 Likes: 6 |
I took my Garand out yesterday to run a few rounds thru it to test this idea about long ago reloads cold welding.
47&1/2 gr 4895, 147 gr BT FMJ from CMP, LC 63 brass. With 8 rounds,no neck splits no sign of over pressure. All shot fine as they did 20+ years ago when I loaded them up. I keep about 500 rounds here for it
If God wanted you to walk and carry things on your back, He would not have invented stirrups and pack saddles
|
|
|
|
Joined: May 2005
Posts: 14,104
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2005
Posts: 14,104 |
IME, you're not likely to notice cold welding unless you decide to pull some bullets. I have pulled bullets from rounds that had cold welded, but none of them from the same lot showed any signs of high pressure or split necks when fired.
Last edited by mudhen; 05/16/17.
Ben
Some days it takes most of the day for me to do practically nothing...
|
|
|
|
Joined: Oct 2011
Posts: 623
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 623 |
IME, you're not likely to notice cold welding unless you decide to pull some bullets. I have pulled bullets from rounds that had cold welded, but none of them from the same lot showed any signs of high pressure or split necks when fired. +1 I've fired some old 30-06 and 270 from the '50s that seemed normal. When I decided to pull some bullets to use more accurate ones, I had to push them in with a seating die first or the collet just slid off. Some of the 270 made an audible "pop" when I pushed them in a hair. I don't think I'd have gotten any out with one of those plastic hammer inertial type pullers.
|
|
|
|
Joined: Oct 2004
Posts: 16,916
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 16,916 |
IME, you're not likely to notice cold welding unless you decide to pull some bullets. I have pulled bullets from rounds that had cold welded, but none of them from the same lot showed any signs of high pressure or split necks when fired. +1 I've fired some old 30-06 and 270 from the '50s that seemed normal. When I decided to pull some bullets to use more accurate ones, I had to push them in with a seating die first or the collet just slid off. Some of the 270 made an audible "pop" when I pushed them in a hair. I don't think I'd have gotten any out with one of those plastic hammer inertial type pullers. Exactly my experience.
|
|
|
|
Joined: Jun 2001
Posts: 19,111 Likes: 6
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jun 2001
Posts: 19,111 Likes: 6 |
So from the replies,I guess that is a non-problem then in regards to shooting them
If God wanted you to walk and carry things on your back, He would not have invented stirrups and pack saddles
|
|
|
|
Joined: Apr 2011
Posts: 152,375 Likes: 44
Campfire Savant
|
Campfire Savant
Joined: Apr 2011
Posts: 152,375 Likes: 44 |
40,000 plus psi will blow it apart no matter how bad it's stuck.
|
|
|
|
Joined: Aug 2007
Posts: 19,497
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2007
Posts: 19,497 |
[quote=hanco]40,000 plus psi will blow it apart no matter how bad it's stuck.[/quote
Retired cat herder.
|
|
|
|
Joined: Jan 2005
Posts: 22,884
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2005
Posts: 22,884 |
If a reloader were to spray coat the bullets with Hornady One-Shot lube prior to loading and let it dry on, would that eliminate cold welding down the road?
|
|
|
|
Joined: Jan 2011
Posts: 590
Campfire Regular
|
Campfire Regular
Joined: Jan 2011
Posts: 590 |
If a reloader were to spray coat the bullets with Hornady One-Shot lube prior to loading and let it dry on, would that eliminate cold welding down the road? No. You need something that prevents the sharing of electrons between the case and jacket.
|
|
|
|
558 members (257Bob, 270wsmnutt, 160user, 257 roberts, 1lessdog, 1_deuce, 57 invisible),
2,544
guests, and
1,221
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,366
Posts18,527,291
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|