Tristar Canik P120.
It has a firing pin block.
It is not a 100% clone. Some CZ parts fit and some do not. CGW informed me that Canik has changed some dimensions over time as well.
The sear and hammer related parts are a no-go.
I think the short reset parts will not fit either.
The adjustable rear sight/FO front are for an SP-01. The front and rear both had to be filed a little to get into the dovetails. The front extended past the slide about 1/16" and had to be trimmed back.
I can look up the CGW part numbers that I used if anyone is interested.
After the mods, I probably have about $280 less invested than a comparable CZ SP-01. It's not a CZ but it's a joy to shoot.
Last edited by kenoh2; 07/17/17.
