These folks should be able to help. Wolfe springs. They do have flat Vee springs if that's what you need. Good luck getting that back 22 pump in service Steve.
"Americans have the right and advantage of being armed-unlike the citizens of other countries whose governments are afraid to trust the people with arms." James Madison
I'm new to threads and forums so I apologize in advance.
I have a pump action Ranger in 22 everything. It most closely matches the Savage 29. It came in and wasn't cycling properly. During my inspection I noticed the firing pin was broken. I welded it up and made it the same size as it was (couldnt find a used one).
This did not fix the issue. Inside the lifter is what Numrich calls a lifter Latch. But theirs looks different than one I have. The latch doesn't seem to be letting bolt go forward. With out it it works but won't push a round up high enough and causes it to jam. I'm pretty sure it was cycling fine without rounds before fixing the firing pin. But it won't work with the lifter lever and a stripped bolt (everything removed).
I can't seem to figure out how to add photos lower than the size requirements. I'll try on the PC.
Last edited by RootedRights; 01/25/24. Reason: Add photos