|
Joined: May 2009
Posts: 2,262
Campfire Regular
|
Campfire Regular
Joined: May 2009
Posts: 2,262 |
Yes, I handload. For full disclosure, where possible I use Lapua brass, then Norma and then others although I'm looking forward to developments with the emerging case manufacturers like Alpha, ADG and Petersen. Lapua/Norma are preferred through hard won experience as when I start reloading I will batch the available brass - the variation between good ol' Hornady/Winchester/Federal brass in the same packet is scary and will not help in the long run.
My issue is that I have an innate dislike of faddish behavior perpetrated by manufacturer marketing and industry magazines/websites which are sometimes nothing more than advertorials. I know there is an industry out there to sell products, be they rifles, ammunition, or column inches (or is that column electrons now?). I look forward to reading about it, but don't think I won't consider the outcomes with a level head and call BS when the words don't add up to reality.
My point is, and remains that there are equally effective products for those who choose to use them. Yes, they do lack ammunition options across the counter which makes them a reloader choice, but they are as effective as the Creedmoor.
You may want to reconsider labelling me (and some others here) an "anti-Creedmoor rifle loony".[/url]
If you cost your company three times as much money in materials and four times as much money in time to do the same job the guy in the cube next to you does, please help me understand how on Earth you are just as effective as he is?
Last edited by seattlesetters; 01/04/19.
What could be a sadder way to end a life than to die having never hunted with great dogs, good friends and your family?
|
|
|
|
Joined: Jul 2001
Posts: 60,264 Likes: 42
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,264 Likes: 42 |
Adamjp,
"Where possible I use Lapua brass, then Norma and then others although I'm looking forward to developments with the emerging case manufacturers like Alpha, ADG and Petersen. Lapua/Norma are preferred through hard won experience as when I start reloading I will batch the available brass - the variation between good ol' Hornady/Winchester/Federal brass in the same packet is scary."
--Gee, I am also VERY well acquainted with Lapua and Norma brass, along with Petersen and others. But have been using Hornady 6.5 Creedmoor brass since 2010, when I bought my first 6.5 Creedmoor rifle, and off-the-shelf Ruger Hawkeye at a local store. Also bought a few boxes of factory ammo, and the rifle's very first 5-shot group at 100 yards with 140-grain A-Max factories went .6". The brass proved very consistent in dimensions, and had also lasted for many handloads since then--along with subsequent 6.5 Hornady brass. In fact I've found Hornady brass in a bunch of other rounds from the .250 Savage to .300 Weatherby excellent in every respect in the past several years. Have also been using Hornady brass for my new 6.5 PRC, in a custom rifle with a Lilja barrel that weights about 7-1/2 pounds scoped. It shoots half-inch FIVE-shot groups with either Hornady factory ammo, or several handloads using OTB Hornady brass.
"Simple fact is that when first launched the Creedmoor was heavily marketed by Hornady, just like they did the 204 Ruger before it, and most recently with the 6.5 PRC (full page adverts in the magazines, pushing product to the reviewers in print and online). Nothing wrong with that, but you must admit that Hornady do have a habit of strong marketing campaigns, sometimes for pretty mediocre product."
Yeah, Hornady promoted the 6.5 Creedmoor during its first three years, just like any company does. But I had learned long ago to wait a little before trying any new round, to see if it lasted. Which is why I waited until 2010 before buying one, along with ammo. Bought it because the trusted guys at the local gun store said both rifles and ammo shot great, not because of anything I read. The word-of-mouth proved to be accurate. (Oh, and I did the same thing with the .204, and found it was everything claimed by Hornady, when using their ammo in an off- the-shelf rifle.)
"My issue is that I have an innate dislike of faddish behavior perpetrated by manufacturer marketing and industry magazines/websites which are sometimes nothing more than advertorials. I know there is an industry out there to sell products, be they rifles, ammunition, or column inches (or is that column electrons now?). I look forward to reading about it, but don't think I won't consider the outcomes with a level head and call BS when the words don't add up to reality."
Would love to hear how "faddish" applies to a cartridge that is now a world-wide standard, a dozen years after its introduction.
"My point is, and remains that there are equally effective products for those who choose to use them. Yes, they do lack ammunition options across the counter which makes them a reloader choice, but they are as effective as the Creedmoor."
Oh, gee, what an insight. I might just run out and buy rifles chambered in those other rounds, but already own just about every one you would list, and none are the first I've owned in those chamberings, often going back at least two decades. Once again,your answer was exactly what I expected.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
Adamjp,
Your response to my question about "equally effective" cartridges was exactly what I expected.
The anti-Creedmoor rifle loonies who inhabit the Campfire (like you) apparently believe EVERY shooter and hunter on earth handloads, and is willing to spend considerable money on custom rifles or rebarreling, to use other 6.5 cartridges than the Creedmoor.
But why should they, when they can buy off-the-rack rifles and factory ammo that will do the same things? I purchased my present 6.5 Creedmoor for the vast sum of $350, and for another $25 can buy a box of factory ammo that groups 5 shots well under an inch. And my rifle's very first 5-shot group at 100 yards with handloads measured .33 inch, which is not exactly an aberration. The other three factory 6.5 Creedmoors I've owned were also very accurate.
...
Yes, there are reasons beside the "recent" publicity on the 6.5 Creedmoor for its extreme popularity. I put "recent" in quotes because the cartridge was introduced a dozen years ago, and has kept growing in popularity since then. Most new factory centerfire rounds only sell well for 2-3 years before starting to fade. That's because publicity can only do so much, and factoryPR departments can only afford to flog some new cartridge for a short time before the cartridge must stand on its own. (In a way, it's like book publishing. If a new book doesn't continue selling after the initial announcement and publicity, then the company eventually quits printing copies, because there's no sense in printing books that never leave warehouses.)
Cartridges that become profitable within that initial period usually stick around for a while, and those that are selling FAR better after a dozen years tend to become world standards, meaning that just about every company making sporting rifles chambers them, and just about every ammunition company makes ammo. That is exactly what's happened with the 6.5 Creedmoor. Not only do major American companies produce both rifles and ammo, but so do many European companies--and that trend continues to spread.
...
But according to you, and others like you, the 6.5 Creedmoor's world-wide and growing popularity, a dozen years after its introduction, is totally due to publicity. John, Yes, I handload. For full disclosure, where possible I use Lapua brass, then Norma and then others although I'm looking forward to developments with the emerging case manufacturers like Alpha, ADG and Petersen. Lapua/Norma are preferred through hard won experience as when I start reloading I will batch the available brass - the variation between good ol' Hornady/Winchester/Federal brass in the same packet is scary and will not help in the long run. If I were asked by someone wanting to get into longer match ranges or a good rifle for light/medium game at any useful range I would certainly recommend a 6.5 Creedmoor. In fact I did back in November when one of my staff was about to undergo a shoulder reconstruction and doctors advice was 'no shooting' for a long time. I recommended a 6.5 Creed in a Varmit weight rifle with a very effective muzzle brake and a limbsaver recoil pad (the 30mm one). He starts shooting that next month (3 months after the surgery). The combination is such that it is an effective package and should be at the top for anyone. FWIW my staffer also reloads, but cannot for probably a year as he cannot manipulate the press post shoulder surgery. The longevity of the Creedmoor is down to the fact that it does work. As I said in an earlier post... ...I'm not saying the Creedmoor does not deserve a reputation for easy accuracy and useful performance for the everyman. There is no other combination that you could buy from most any sporting goods store that would perform as well out of the box - this is why the 223 is more popular than the 222 or 222 Magnum... Simple fact is that when first launched the Creedmoor was heavily marketed by Hornady, just like they did the 204 Ruger before it, and most recently with the 6.5 PRC (full page adverts in the magazines, pushing product to the reviewers in print and online). Nothing wrong with that, but you must admit that Hornady do have a habit of strong marketing campaigns, sometimes for pretty mediocre product. As you state, a cartridge popularity usually wanes after 2-3 years (the 6.8 SPC is the latest of a long line of Remingtons marketing missteps). That the Creedmoor continues to sell strongly suggests that it has reached a level of acceptance with the buying public, passing a fad stage several years ago and has became a benchmark cartridge. My issue is that I have an innate dislike of faddish behavior perpetrated by manufacturer marketing and industry magazines/websites which are sometimes nothing more than advertorials. I know there is an industry out there to sell products, be they rifles, ammunition, or column inches (or is that column electrons now?). I look forward to reading about it, but don't think I won't consider the outcomes with a level head and call BS when the words don't add up to reality. My point is, and remains that there are equally effective products for those who choose to use them. Yes, they do lack ammunition options across the counter which makes them a reloader choice, but they are as effective as the Creedmoor. You may want to reconsider labelling me (and some others here) an "anti-Creedmoor rifle loony". If you were to take a Tikka T3 Varmit in each of these cartridges, buy or assemble equal cartridges then it would difficult to spot a difference between them. Hmm, sounds difficult. Since they don't sell the T3 Varmit in 260 Remington, 7-08 Remington, 6.5x55 Swedish or 6.5x47 Lapua (NO PRODUCT). (Available in 6.5 Creedmoor.) As usual, you only look to what is sold over the counter in the USA, not what is available from the factory or by special order from Beretta USA. Tikka T3x Varmit Stainless Factory ProductionWhat is your age?
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: May 2007
Posts: 1,088 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: May 2007
Posts: 1,088 Likes: 1 |
I like my 6.5CM Hunter and I can buy reasonably priced Ammo unlike my 260 Rem which was a reload only proposition, not that I minded.
Mind you, I do regret selling that Kimber Monatana 260.
The factory Ammo availability means I haven’t reloaded for the 6.5CM, yet!
Happy hunting.
|
|
|
|
Joined: Jan 2006
Posts: 5,626 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2006
Posts: 5,626 Likes: 1 |
If you were to take a Tikka T3 Varmit in each of these cartridges, buy or assemble equal cartridges then it would difficult to spot a difference between them. Hmm, sounds difficult. Since they don't sell the T3 Varmit in 260 Remington, 7-08 Remington, 6.5x55 Swedish or 6.5x47 Lapua (NO PRODUCT). (Available in 6.5 Creedmoor.) HaHaHa! You must be stupid! Try calling Beretta USA and tell them you want to order one! Good luck!
FÜCK Jeff_O!
MAGA
|
|
|
|
Joined: Sep 2010
Posts: 31,442
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,442 |
Call Beretta and ask for duhh varmit.
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Oct 2000
Posts: 30,316 Likes: 4
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,316 Likes: 4 |
My point is, and remains that there are equally effective products for those who choose to use them. Yes, they do lack ammunition options across the counter which makes them a reloader choice, but they are as effective as the Creedmoor.
Well, it's hard to argue with such logic...
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Oct 2010
Posts: 1,364
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,364 |
Ok, I’ll bite. How do the CMs feed from the magazine ? That .462” diameter shoulder has me pondering that aspect of their performance. Fine Anyone care to elaborate ?
History May Not Repeat, But it Rhymes.
|
|
|
|
Joined: Jul 2001
Posts: 60,264 Likes: 42
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,264 Likes: 42 |
Sure. I have now owned four factory 6.5 Creedmoor rifles, a Ruger Hawkeye, Weatherby Vanguard, and two Ruger Americans. Have also shot several other 6.5 Creedmoors extensively, including a Franchi Momentum, H-S Precision and Fierce Arms. All fed cartridges fine.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Oct 2010
Posts: 1,364
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,364 |
Thanks MD 😉
It would appear then that the “Over-Improved” .462” CM shoulder isn’t a detriment to smooth feeding. Back in the day, lots of taper was the answer for smooth feeding. Apparently not so much nowadays
History May Not Repeat, But it Rhymes.
|
|
|
|
Joined: Oct 2004
Posts: 25,844
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 25,844 |
My dog is a member of the "Turd Like Clan"
Covert Trail Cameras are JUNK
3 Time Dinkathon Champion #DinkGOAT
|
|
|
|
Joined: Sep 2010
Posts: 31,442
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,442 |
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Oct 2010
Posts: 1,364
Campfire Regular
|
Campfire Regular
Joined: Oct 2010
Posts: 1,364 |
History May Not Repeat, But it Rhymes.
|
|
|
|
Joined: Aug 2006
Posts: 22,957 Likes: 21
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2006
Posts: 22,957 Likes: 21 |
|
|
|
|
Joined: Sep 2010
Posts: 31,442
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,442 |
Yes, it's good to have this resolved...
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Apr 2010
Posts: 14,766 Likes: 5
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 14,766 Likes: 5 |
My grandson had Jon Beanland build him a 6.5 Creedmoor on a M700 Remington action and first day he got the rifle to my range he asked me to shoot three rounds with it. Photo below shows the shots. I told him the last shot broke just a tat low. This was with 147 gr. Hornady ammo. After getting a zero at 200 yards he shot this rifle all the way back to 800 yards and it shoots extremely well. Joel was constantly ringing a 6" swinger we have at 800 and frankly it's just damn boring to shoot! Untitled by Sharps Man, on [bleep] Untitled by Sharps Man, on [bleep]
Last edited by Sharpsman; 01/10/19.
Even birds know not to land downwind!
|
|
|
|
Joined: Sep 2006
Posts: 2,484
Campfire Regular
|
Campfire Regular
Joined: Sep 2006
Posts: 2,484 |
Glad this is resolved.....again.....and i can stop worrying about a chronograph, if my depends are leaking, and what the weather is in states im not currently in. Feels good to just to sit at loading bench with 6.5cm brass, 4350, and 147elds.
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
Ok, I’ll bite. How do the CMs feed from the magazine ? That .462” diameter shoulder has me pondering that aspect of their performance. Fine Anyone care to elaborate ? Yes, it feeds FINE, hence fine. Not sure how much more elaborate I can get.
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Dec 2002
Posts: 22,276
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 22,276 |
It's a neat round, with a lot of pluses, But I'm not really motivated to get something else in that .25-.284 size range. I do have an 8" twist .280AI in a Ruger#1 being built, and that one is going to be a super long range rig, without going to the big magnums.
I bought one of the more inexpensive AR-10's in 6½ CM, and it shoots very well in that platform, handily outshooting both of the .308's I have, including one with a bull barrel.
"...the designer of the .270 Ingwe cartridge!..."
|
|
|
|
Joined: Apr 2004
Posts: 3,475
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2004
Posts: 3,475 |
I still don`t have one....but got a lot of 250AI brass with that headstamp! Shoots great! Think I`m getting some mo-jo off it.
|
|
|
|
599 members (1100mag, 10gaugemag, 160user, 10Glocks, 01Foreman400, 52 invisible),
18,860
guests, and
1,317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,973
Posts18,539,922
Members74,052
|
Most Online20,796 04:44 PM
|
|
|
|