Gavin does great handloading video's , he was good friends with 24hrcmpfr member - Jim the Plumber - who passed away unexpectedly Dec. of 2017 [hope I got the date right] , Thought I'd throw it on here since there has been questions on new presses - I might be in the market for a new press .
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
Very good video, interesting and informative (I did not see ALL of it, though...gotta hit the hay very soon so I'll see it in its entirety when I can).
I do question the summarized results, though. When showing the Co-Ax, he implied that he used non-Forster die lock rings...what I saw looked like RCBS die lock rings. I suspect that may have skewed his run-out numbers with that press. I could be wrong, but I believe Forster rings work best with the Co-Ax.
Don't be the darkness.
America will perish while those who should be standing guard are satisfying their lusts.
When he said he was shooting 1/3 MOA with the cheapest press, I kinda figured the rest was beyond my interest level.
I’m yet a wet-behind-the-ears novice, but already turning out more accurate ammo then I’d have thought, and even using that cheapest press.
Cheap but accurate presses? $300 bug-hole shooting rifles? $150 scopes that outperform the alphas of 20-30 year’s ago? <MOA factory ammo? We’re truly in the golden age of shooting sports.
FC
Last edited by Folically_Challenged; 04/09/19.
"Every day is a holiday, and every meal is a banquet."
Checked some factory ammo once fired brass last night on the RCBS Concentricity gauge - shot in a custom 22-250 Mickey Coleman built for me . Cleaned 10 cases with fine steel wool - worst case was 2 thousandths , neck sized cases with three presses - two Lee hand press and an old Lee 3 turret press . The turret press is old and was given to me years ago - bit of rust on ram etc. , one hand press has a good bit of wiggle in the ram , other is better but still a bit of wiggle. Anyway all three presses added a bit of runout using a Lee collet neck die . The hand press with the loose ram turned out one case with 7+thousandth runout . [added 5K + runout] to the brass .
I'm not running Lee stuff down by any means the turret press was very neglected - the hand presses cost $29 each when I bought them and have turned out hordes of 3/4-1'' ammo . Plus quite a few lucky groups measuring .3-.4'' but that's not everyday stuff.
Ordered a new RCBS Summit from Midsouth today - hopefully it makes a bit more concentric ammo .
Last edited by ol_mike; 04/10/19.
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
Recieved my RCBS Summit press , it was on back-order but not for long .
Smooth as silk , I'll do the same test as I mentioned above and see if it introduces run-out in the 22-250 cases , but i'm heading to my hunting lease for a few days right now .
Cascade , yeah Gavin doesn't leave out much when it comes to handloading and he shoots the loads and shows the results which I really like .
Good shooting and Happy reloading .
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
I saw that not long ago and found it very interesting. Nice to see RCBS doing so well, I have a Reloader Special 5 which he didn't test of course but I'm quite happy with it and have no reason to replace it. Might get a second press one day and one of the RCBS presses or a Redding will be the top choices.
Ol mike, that Summit press sure is different but looks to be very good. Hope you let us know the results of your 22-250 tests.
Really liking the Summit press it's making nice straight ammo and is very smooth . Seated some 180gr. Berger Hybrids and 180gr. Hornady ELD-M using the ''short handle'' [bought separately] gives very good feel . Looking forward to testing the 180's soon .
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
Just yesterday I loaded some 7mm-08/150 ELD-X rounds. This was on a 35 year old RCBS II, used a Lee collet neck die and Lee seater (virgin brass) and runout was 0.001".
The press has been a part twice for lube, second time noticed wear on the pins so rotated them, good for another 35 years.
Yet another data point showing that the RCBS RC outperforms the Forster Co-Ax on quality of ammo produced. Not really news to people who have measured it, but probably news to the reloading community as a whole.
Really liking the Summit press it's making nice straight ammo and is very smooth . Seated some 180gr. Berger Hybrids and 180gr. Hornady ELD-M using the ''short handle'' [bought separately] gives very good feel . Looking forward to testing the 180's soon .