24hourcampfire.com
24hourcampfire.com
-->
Previous Thread
Next Thread
Print Thread
Hop To
Page 2 of 5 1 2 3 4 5
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by SheriffJoe
Originally Posted by Sitka deer
Originally Posted by SheriffJoe



0000 steel wool or 3M pad (black).

Steel wool often leaves pieces of steel embedded in the finish to rust later and create freckles.

The maroon 3M pads are what you want rather than the coarser black ones. They will work just fine. Rottenstone is old school and messier, but just as effective.




Nope. 0000 will not leave anything embedded in the finish of something that is already glossy. Wipe it down, Sitka.

Black pad is Ultra Fine, Red is Very Fine.

Your fantasy... wink I have seen it with my own eyes too many times.


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
GB1

Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445



Nonsense.

Learn to be a better gunsmith.


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by SheriffJoe



Nonsense.

Learn to be a better gunsmith.


I do not have the issue because I stopped using steel wool a very long time ago. I have seen it on many occasions in the work of others and have repeatedly proven the possibility of it to others by doing test boards.

I would also like to point out the particles and freckles are often only visible with a little magnification, though their presence creates a haze or loss of depth in the finish.


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Nov 2005
Posts: 23,083
G
Campfire Ranger
Online Content
Campfire Ranger
G
Joined: Nov 2005
Posts: 23,083
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


"You can lead a man to logic, but you cannot make him think." Joe Harz
"Always certain, often right." Keith McCafferty
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
IC B2

Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.

Many miss the concept of heat generated at the tiniest level literally plasticizing the surface and grabbing tiny particles... though I know you probably learned that decades ago. And it is still true.

Last edited by Sitka deer; 06/01/19. Reason: Frigging autocorrect!

Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by SheriffJoe
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!

Prove you are right... I dare you... Make a test board and actually look at it.


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Jan 2001
Posts: 7,988
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Jan 2001
Posts: 7,988
No professional furniture restorer I know of would use steel wool of any grade on a finish and those guys know exactly what they are talking about. I've switched over to the 3M pads a long time ago and find them easier to use anyway...

Last edited by Sheister; 06/01/19.

Never underestimate your ability to overestimate your ability.
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445
Originally Posted by Sitka deer
Originally Posted by SheriffJoe
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!

Prove you are right... I dare you... Make a test board and actually look at it.



You have issues about being right. I pity you.


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
Joined: Aug 2005
Posts: 26,337
G
Gus Offline
Campfire Ranger
Offline
Campfire Ranger
G
Joined: Aug 2005
Posts: 26,337
Originally Posted by SheriffJoe
Originally Posted by Sitka deer
Originally Posted by SheriffJoe
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!

Prove you are right... I dare you... Make a test board and actually look at it.



You have issues about being right. I pity you.


i think a lot of folks have an issue with that, especially my own self.


IC B3

Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by SheriffJoe
Originally Posted by Sitka deer
Originally Posted by SheriffJoe
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!

Prove you are right... I dare you... Make a test board and actually look at it.



You have issues about being right. I pity you.

You read incorrectly. I have issues with giving bad advice and causing good people problems when they follow the advice. Friends give me a hard time because I constantly tell them how easy it is to test my advice.

You seem to enjoy being wrong and misleading people. I would feel badly if you accused me of that. Unfortunately for you it is obvious I am correct.


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Dec 2003
Posts: 86,180
Campfire Oracle
Online Happy
Campfire Oracle
Joined: Dec 2003
Posts: 86,180
Well, at least you’re humble!
wink


If you take the time it takes, it takes less time.
--Pat Parelli

American by birth; Alaskan by choice.
--ironbender
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by ironbender
Well, at least you’re humble!
wink


Humility, just one of my many virtues!

Exceeded only by my reasons for being humble!


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Nov 2005
Posts: 23,083
G
Campfire Ranger
Online Content
Campfire Ranger
G
Joined: Nov 2005
Posts: 23,083
Originally Posted by SheriffJoe
Originally Posted by gnoahhh
That's an axiomatic truth in the marine industry around here also. No marine brightwork finishers I know or worked with would employ steel wool for that reason.


Yeah, EVERYONE knows THAT. Shall keep it in mind next time I want to make a satin gun stock out of a shiny boat, ship or vessel. Geniuses!



I think what we have here is yet another 'Fire troll. Ignorant of much, and too myopic to know it.


"You can lead a man to logic, but you cannot make him think." Joe Harz
"Always certain, often right." Keith McCafferty
Joined: May 2005
Posts: 16,554
Campfire Ranger
Offline
Campfire Ranger
Joined: May 2005
Posts: 16,554


The key elements in human thinking are not numbers but labels of fuzzy sets. -- L. Zadeh

Which explains a lot.
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445



You saying that from your couch, refrigerator or your toilet?


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
There you go! Keep it classy!


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445



There YOU go...still mad at his mommy for his failed abortion.


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
Joined: Jun 2008
Posts: 664
Q
Campfire Regular
Offline
Campfire Regular
Q
Joined: Jun 2008
Posts: 664
Originally Posted by Reba
I have a gun stock with a high gloss finish.

What would be the best way to make it less shiny?

Thanks


I didn't read through the pissing contest so you may already have answered this but but could you post a photo of the stock? Do you know what type of finish is on it now?


Like Sam Houston, I will vote for what is best for ME in 2020.
Texans read their Bibles to find what they want it to say, and are blind to what it actually says...
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
Offline
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627
Originally Posted by Quick_Karl
Originally Posted by Reba
I have a gun stock with a high gloss finish.

What would be the best way to make it less shiny?

Thanks


I didn't read through the pissing contest so you may already have answered this but but could you post a photo of the stock? Do you know what type of finish is on it now?

Really? You cannot be bothered to read the first few responses, but you can still pretend to have a clue?


Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
Page 2 of 5 1 2 3 4 5

Moderated by  RickBin 

Link Copied to Clipboard
AX24

116 members (300_savage, 41rem, 808outdoors, 10gaugemag, 16 invisible), 1,569 guests, and 943 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,191,387
Posts18,469,716
Members73,931
Most Online11,491
Jul 7th, 2023


 


Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.



Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.059s Queries: 14 (0.003s) Memory: 0.9009 MB (Peak: 1.0390 MB) Data Comp: Zlib Server Time: 2024-04-26 06:42:32 UTC
Valid HTML 5 and Valid CSS