|
Joined: Nov 2010
Posts: 37,088
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,088 |
Just got my M70, classic CRF action, back from a gunsmith who did a number of things to it, one of which was adjusting the trigger to 2lbs.
The rifle is not cocking consistently. In fact, it's closer to consistently not cocking. I suspected it had to do with the trigger and sure enough, if I apply pressure to the rear of the trigger while cocking, it works fine. I removed the receiver from the stock, a McMillan A3, and tested it. I cycled the bolt 15 times and it cocked every single time, no problem. I checked the trigger weight and it was coming in just a few ounces below 2lbs. Couldn't figure it out so re-assembled the rifle and once I torqued the action into place, the problem returned.
Has anyone encountered this problem? What was the solution?
Gunsmith is several states over so would prefer not to have to send it back unless necessary. If the difference between working and not working is torquing the action screws, then the stock's gotta be touching something it shouldn't be touching. And I agree on checking the mag box to make sure it's not in a bind. I like to be able to feel some mag box movement after the gun is torqued. I've had to grind some off a box mag to get it free from any and all pressure. Redneck is a M-70 guru. Not sure what he said in his PM, but I would go with his recommendations. DF
Last edited by Dirtfarmer; 08/26/19.
|
|
|
|
Joined: Feb 2010
Posts: 1,553
Campfire Regular
|
Campfire Regular
Joined: Feb 2010
Posts: 1,553 |
I don't think much of a gunsmith who doesn't check his work before sending the rifle back to the customer.
NRA Endowment Life Member, G.O.A supporter
|
|
|
|
Joined: Nov 2010
Posts: 37,088
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,088 |
I don't think much of a gunsmith who doesn't check his work before sending the rifle back to the customer. +1 DF
|
|
|
|
Joined: Jul 2019
Posts: 133
Campfire Member
|
Campfire Member
Joined: Jul 2019
Posts: 133 |
In defense of the unnamed smith, it's a couple of states away, depending on where, that can be a big difference in humidity and such. It isn't unheard of for a McMillan stock to warp as result of environmental changes. We all like to pretend they are completely stable, but that isn't always the case.
|
|
|
|
Joined: Jan 2001
Posts: 59,140
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 59,140 |
This is a wood stock, from the pics he sent me..
Ex- USN (SS) '66-'69 Pro-Constitution. LET'S GO BRANDON!!!
|
|
|
|
Joined: Aug 2010
Posts: 48,024
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,024 |
This is a wood stock, from the pics he sent me.. In the op, he says its a McMillan.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Nov 2010
Posts: 37,088
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,088 |
I wouldn’t attribute this problem to a McM stock warping enough to be an issue.
If they do move, I’d say not that much.
DF
|
|
|
|
Joined: May 2010
Posts: 7,348
Campfire Tracker
|
Campfire Tracker
Joined: May 2010
Posts: 7,348 |
I suspect that something is binding.
"When the going gets weird, the weird turn pro." Hunter S. Thompson
|
|
|
|
Joined: Aug 2010
Posts: 48,024
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,024 |
I wouldn’t attribute this problem to a McM stock warping enough to be an issue.
If they do move, I’d say not that much.
DF I totally agree.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jan 2001
Posts: 59,140
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 59,140 |
This is a wood stock, from the pics he sent me.. In the op, he says its a McMillan. You're correct.. I looked at the pic again and it's definitely not wood.. I musta had my tan sunglasses on at the time.. I wouldn’t attribute this problem to a McM stock warping enough to be an issue.
If they do move, I’d say not that much.
DF No question..
Ex- USN (SS) '66-'69 Pro-Constitution. LET'S GO BRANDON!!!
|
|
|
|
Joined: Aug 2010
Posts: 48,024
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,024 |
Op, any updates on the rifle in question?
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jan 2013
Posts: 1,857
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2013
Posts: 1,857 |
Op, any updates on the rifle in question? Yes. I sent Redneck some pics and I think we narrowed down that the bedding in the stock is a bit high somewhere. When fully assembled, there's a lot space between the trigger and trigger guard... more so than normal. The rifle is going back to the gunsmithing shop to be repaired, all at their cost. In exchanging emails with Redneck, once I get the rifle back I think I'll send it to him at some point to have him do a trigger job on it.
|
|
|
|
130 members (44mc, 3333vl, 7887mm08, 308ld, 35, 12 invisible),
1,548
guests, and
872
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,387
Posts18,469,766
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|