Home Forums Gear Free Classifieds Portable Shooting Bench Brackets

Hello Lonny. I’d like a set of your leg mounts please. Just joined to contact you so can’t pm you yet. Could you contact me with the info I need to purchase a set from you? Thank you

I received my brackets last week and they are really nice. The welds are perfect, great product.

Like most have done, I glued and screwed together 2 pieces of 3/4” plywood and sawed out my pattern similar to the plan that came with the brackets. The bench turned out really well.

The top is very solid and has no flex at all as far as I can tell. There is no movement at all, front to back but one thing that I have noticed is that I have a slight side to side movement at the rear of the bench.
I double checked the bolts and legs to be sure they were all tight but still have slight movement. The movement is noticeable with the rifle shouldered and on target. I’m using both front and rear bags and don’t have this problem with my permanent bench.

I assume the movement is from having only one leg in the rear and may have to add another leg to the rear to stabilize it.

Anyone else have this movement issue?

My old rifle club used three legged shooting benches with out any side to side movement. The benches were set for both right and left handed shooters, possibly the extra weight helped

Got my table and stool brackets today. Excellently done.

Thank you Lonny

What type and Length bolts are you using to mount the brackets?

Are you using a washer between the bolt and bottom of table?

Looks like the bench will be 3" Thick when finished.

My guy who is building this is a super good wood working guy. He suggested Titebond Glue and finish with many coats of Teak Oil

Any other suggestions before I head to Home Depot ??

Just like all on here say, the brackets are amazing, packaging was amazing, shipping was very timely with great communication by Lonny. I HIGHLY suggest you get a set if you need a bench.

Stool brackets?? Same as the bench brackets? Share please!

Pm sent to Lonny on the bench brackets this morning

Ordered 2 sets from Lonny
Really nice and packaged very well
Jeff

Lonny,

I’ve been searching for these. I joined this forum just to buy these. I would like to purchase these right away.

I noticed in your photos the bolt pattern on the table are parallel to the edges, is there a left, right and one perpendicular?

Being a new member, I’m unable to PM anyone. Can you please send a link to answerpleasehotmail.com?

Best Regards,
Mel56
_________________________

If given a choice between right and kind, choose kind.

Sent.

I am in the same boat as Mel56. I'm interested in a set of these but I'm unable to send a PM. Can you email reynoldseghotmail.com?
Thank you,
Erik_72

edit: I found your email a page or two back. I'll send you an email, Lonny.

Sir, I would take a set.

Highly recommend

If these are still available I'd love a set! For some reason the site won't let me private message. Mike

I have pretty much the same table except for attaching the leggs. Top is 1 1/8" car decking. 1 1/4" steel pipe legs and pipe flanges to hold on to the leggs, Just screw them in.

[Linked Image]

The wedges to fit the flanges to are 3/4" hardwood glued and screwed to the underside of the table and wide as the flanges are round. I'd probably have liked the welded leggs but I don't weld so good! Like the finish on that table. Cardecking is alright but a bit ruff!

[Linked Image]

I will take two sets, if they are still available. PM following.

Lonny I could use a set of those brackets myself.
I cannot pm you yet

Any idea if you can ship up to Canada??

Nice set of brackets went with 4.

What has everyone gone with for leg height.
I've seen 32" mentioned but that's it.

I went with 3. I'm 6' tall