|
Joined: Apr 2008
Posts: 10,966 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Apr 2008
Posts: 10,966 Likes: 1 |
I've struggled with this for some time. How do you all document reloading results? I've been writing load information on the target and taking photos. I have hundreds of such photos: Unfortunately, I have no way to search for data. For example, can't remember if I tried 140 partitions in the Tikka 7mm-08. I'm also not writing down dates, temp, or wind. Figure I could look up historical data for temps based on the date I took the photo. Anyhow, how are you folks tracking results? Please share any tips or tricks.
Last edited by dye7barrel; 01/26/20.
|
|
|
|
Joined: Jun 2001
Posts: 2,253
Campfire Regular
|
Campfire Regular
Joined: Jun 2001
Posts: 2,253 |
I start the same way you're doing, but transfer the data in a structured format to my computerized recipe book.
Makes it easy to search, slice and dice any which way by caliber, bullet, rifle, date, powder, etc. In anyway that makes sense to you.
The important part is dumping all the data into the collection basket. Figuring out which factoids are important to you can happen as you go.
I do the same thing with hunting results. Make the chicken scratches in a handy little notebook back at camp each night while still fresh in my feeble brain, then get them into the computer when I get back to the shack.
It's you and the bullet, and all the rest is secondary.
|
|
|
|
Joined: Sep 2006
Posts: 2,109 Likes: 4
Campfire Regular
|
Campfire Regular
Joined: Sep 2006
Posts: 2,109 Likes: 4 |
I used to keep everything in a 8 1/2x11 notebook. Different sections depending on the cartridge. Lost them all in a house fire and never got started again. Now just write all the data on masking tape attached to the box it's in.
Last edited by DonFischer; 01/26/20.
|
|
|
|
Joined: Feb 2010
Posts: 17,904 Likes: 7
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,904 Likes: 7 |
I have developed a target with lines for all the pertinent data, after a range session the targets get three hole punched and put into caliber specific three ring binders. Organizing things that way I can see by reviewing the targets which loads were good and those not so good. If anyone would like to see one of these targets PM your e-mail address to me and I'll send a pic. I've also got a rubber stamp that I use to create labels for boxes/bags of reloaded ammo. There are lines for data like COAL, MV etc. makes it easy to duplicate loads.
|
|
|
|
Joined: Mar 2005
Posts: 26,368 Likes: 17
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,368 Likes: 17 |
I write my loads and results in a 3 ring binder, and of course it's in chronological order. In more recent years I've been cutting out the groups on the target and scotch taping them into the binder along with the load notes. Needless to say, I have some groups that take up an entire sheet of notebook paper...............
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Sep 2004
Posts: 8,254 Likes: 5
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2004
Posts: 8,254 Likes: 5 |
Another 3-ring binder dinosaur here. I have my own form that I print from a spreadsheet file.
|
|
|
|
Joined: Mar 2019
Posts: 420
Campfire Member
|
Campfire Member
Joined: Mar 2019
Posts: 420 |
I use a combination of technology. Takes pictures of the target and calculate with rangebuddy app. Transfer pics, range info and results to computer in excel. Excel will also let you link so input a link to the picture of the target for that load. Takes a bit of time up front, but once you get the hang of it things go pretty quick. Excel will also let you search/reorder the data for whatever column or specific measurement you want. Just make sure to keep a backup cope in the event of electronic failure.
|
|
|
|
Joined: Oct 2006
Posts: 24,811 Likes: 32
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2006
Posts: 24,811 Likes: 32 |
https://www.lymanproducts.com/lyman-reloading-data-logSince 2004 , take it to the range and log info. pronto , do as i say not as i do . yeah .
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Dec 2007
Posts: 1,841
Campfire Regular
|
Campfire Regular
Joined: Dec 2007
Posts: 1,841 |
I keep a folder for each rifle. Keep all my load stuff in chronological order. I write down as much as possible, also take target pics and also keep the targets.
Salmonhead
|
|
|
|
Joined: Jun 2011
Posts: 1,009
Campfire Regular
|
Campfire Regular
Joined: Jun 2011
Posts: 1,009 |
Another 3-ring binder dinosaur here. I have my own form that I print from a spreadsheet file.
Same here. I had to use a legal size sheet. I segregate with divider tabs per rifle. I can also input the data to my computer since the form is in an Excel format.
|
|
|
|
Joined: May 2007
Posts: 5,751 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,751 Likes: 1 |
Another 3-ring binder dinosaur here. I have my own form that I print from a spreadsheet file.
Same here. I had to use a legal size sheet. I segregate with divider tabs per rifle. I can also input the data to my computer since the form is in an Excel format. +1. FC
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Jan 2005
Posts: 1,325 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Jan 2005
Posts: 1,325 Likes: 1 |
I use a oilfield tally book, as a log book for each rifle. On the first page or two in the book I record all the comparator measurements of bullets I use, rifle info, any upgrades to the rifle etc. For shooting sessions I open book so that I have two pages to record across; date, weather conditions, load information,( powder& powder charge bullet & bullet weight, brass, & brass oal, # of firings for the brass), comparator measurement, across the header. I usually shoot 5 shot strings, so I list the shots down the left side of the left page and record poi vs poa, fps, for each shot in the string and anything I feel needs to be included across the open two pages , some times I draw a small replica of target in the right margin and record numbered poi by shot, at the bottom of the numbered string I will make notes and record group size, and every page I can tally the round count for the barrel.
Hope all that makes sense.
Yes, I am OLD SKOOL, but I have been doing it this way for ever, and it works for me.
There is a war on America and America is losing
|
|
|
|
Joined: Jan 2009
Posts: 1,389
Campfire Regular
|
Campfire Regular
Joined: Jan 2009
Posts: 1,389 |
I am able to pack a lot of info into one page by graphing my results. I started off keeping targets, but quickly decided that would occupy too much space and be too hard search.
|
|
|
|
Joined: Oct 2008
Posts: 3,943
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2008
Posts: 3,943 |
I write my loads and results in a 3 ring binder, and of course it's in chronological order. In more recent years I've been cutting out the groups on the target and scotch taping them into the binder along with the load notes. Needless to say, I have some groups that take up an entire sheet of notebook paper............... Pretty much my method as well. I made a "Load Development" sheet in Excel where I can document the rifle, the bullet, brass (often noting # of firings), primer, date and temp. Below that I have multiple rows to document varying powder charges or changes in bullet jump. Columns in this lower section outline velocity, target distance, extreme spread and group size. I also keep the 8.5x11 targets 3 hole punched and include with this load development sheet for record keeping. These are bundled in a large 3-ring binder that has tabs by rifle to keep it somewhat sorted. If I sell a rifle, I remove that section and stick it in another binder that stays on the shelf. I have twice had a rifle come back to me after selling. The first time I trashed my load data notes but wisened up. I was able to go straight back to my proven loads for the second returning rifle without missing a beat. Edit: I recognize this is a stupid level of micro-minutiae for general hunting rifles but it lets my inner OCD geek do its thing while I enjoy my hobby.
|
|
|
|
Joined: Nov 2017
Posts: 1,188
Campfire Regular
|
Campfire Regular
Joined: Nov 2017
Posts: 1,188 |
I started out using a spiral notebook that had load information in it, but didn't have the target group included. I included notes to indicate if it was an acceptable group, exceptional, etc. and any information concerning kills with that load.
I graduated to using index cards and cut the groups out and paste them on the card. Load recipe on the front, notes on the back.
I keep my stuff in a 3 ring binder as well. I use targets off of 6mmBR.com that I print on 8.5 X 11 paper and then punch holes in them. Take them to the range, shoot them, put them in the binder. All of the relevant load information and other specs are listed on the target. I also use the 24hourcampfire targets.
The lack of planning on your part does not constitute an emergency on my part!
|
|
|
|
Joined: Feb 2009
Posts: 8,073
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2009
Posts: 8,073 |
https://imgur.com/gallery/S5JcKKUOld school record keeping. Three ring notebook and targets. Hasbeen
hasbeen (Better a has been than a never was!)
NRA Patron member Try to live your life where the preacher doesn't have to lie at your funeral
|
|
|
|
Joined: Jan 2010
Posts: 13,269 Likes: 7
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2010
Posts: 13,269 Likes: 7 |
I keep a folder for each rifle. Keep all my load stuff in chronological order. I write down as much as possible, also take target pics and also keep the targets. Me too
Obey lawful commands. Video interactions. Hold bad cops accountable. Problem solved.
~Molɔ̀ːn Labé Skýla~
Member #547 Join date 3/09/2001
|
|
|
|
Joined: Dec 2015
Posts: 911 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Dec 2015
Posts: 911 Likes: 2 |
You mean to tell me no one goes by memory. Lol.
|
|
|
|
Joined: Apr 2008
Posts: 10,966 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Apr 2008
Posts: 10,966 Likes: 1 |
You mean to tell me no one goes by memory. Lol. I have, and end up relearning a bunch!
|
|
|
|
Joined: Dec 2004
Posts: 14,488
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 14,488 |
I use a spreadsheet. I use different tabs for different cartridges. I record the bullet, number of rounds, powder & charge, primer, brass, seating depth, date loaded, date fired and temperature, velocity average for each charge, extreme velocity spread, and group size. The beauty of it is that I can easily sort data to see what loads have turned in the best accuracy over long periods of time, since I've done it this way since about 2005. Example: Hornady 154-grain SP 3 56.5 / H4831 Fed 210M -0.030 01/06/08 01/15/08 1.70"
3 57.0 / H4831 Fed 210M -0.030 01/06/08 01/15/08 1.12"
3 57.5 / H4831 Fed 210M -0.030 01/06/08 01/15/08 .50"
3 58.0 / H4831 Fed 210M -0.030 01/06/08 01/15/08 .83
3 58.5 / H4831 Fed 210M -0.030 01/06/08 01/15/08 1.75" (I didn't record velocities when I tested this load.)
Don't be the darkness.
America will perish while those who should be standing guard are satisfying their lusts.
|
|
|
|
598 members (06hunter59, 10gaugeman, 12344mag, 10gaugemag, 10Glocks, 1234, 54 invisible),
13,402
guests, and
1,027
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,124
Posts18,542,310
Members74,057
|
Most Online21,066 May 26th, 2024
|
|
|
|