|
|
Joined: Jun 2004
Posts: 44,869 Likes: 5
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,869 Likes: 5 |
If I send a Forster FL die in to get the neck honed, do I use the thinnest brass I have to figure out how much to have removed? If you want it to work for all your brass, then yes. I had my Forster 308 die honed to better match the thicker Lapua, Federal and LC brass because my RCBS die was just fine for the types with thinner necks.
|
|
|
|
|
Joined: Jun 2004
Posts: 44,869 Likes: 5
Campfire 'Bwana
|
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,869 Likes: 5 |
Pardon a dumb question but as somebody here always says, "Start at the start" (although that is usually interspersed with a few expletives).
So the question: what problems are you seeing with the RCBS dies and what is your technique? I have no problem getting <.001" runout with any of my RCBS dies so unless you are running them on a progressive or have a set up problem, how are you setting them up, what is your procedure and what is your goal?
I have no doubt the other manufacturers mentioned make superior dies but short of BR haven't seen the need for them.
If it's just to buy stuff, carry on. What runout are we talking about?
|
|
|
|
|
Joined: Sep 2010
Posts: 4,004
Campfire Tracker
|
|
Campfire Tracker
Joined: Sep 2010
Posts: 4,004 |
Pardon a dumb question but as somebody here always says, "Start at the start" (although that is usually interspersed with a few expletives).
So the question: what problems are you seeing with the RCBS dies and what is your technique? I have no problem getting <.001" runout with any of my RCBS dies so unless you are running them on a progressive or have a set up problem, how are you setting them up, what is your procedure and what is your goal?
I have no doubt the other manufacturers mentioned make superior dies but short of BR haven't seen the need for them.
If it's just to buy stuff, carry on. What runout are we talking about? Runout of sized brass. If we start talking about bullet runout, that seems to be beyond what the OP was asking and involves other dies. Personally I use mostly Forster for seating. My concern is that the OP may be disappointed in his purchase if the problem is not with his current dies. A properly made FL die cannot induce runout.
Last edited by Blacktailer; 09/02/22.
I am continually astounded at how quickly people make up their minds on little evidence or none at all.
Jack O'Connor
|
|
|
|
|
Joined: May 2003
Posts: 5,792
Campfire Tracker
|
|
Campfire Tracker
Joined: May 2003
Posts: 5,792 |
I try to keep things simple when reloading, to the extent I can anyway. Would like to try a better quality die than my current standard RCBS. Don’t really want the added complexity of bushings, so who makes the most concentric FL expander ball dies? Yes, I realize looking for less runout with an expander ball is kinda contradictory, but let’s just go with it for the time being. Forster, because the neck is still held in alignment as the expander ball is being pulled through the neck, and Mighty Armory. John
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14
|
|
|
|
|
Joined: Nov 2010
Posts: 578 Likes: 1
Campfire Regular
|
|
Campfire Regular
Joined: Nov 2010
Posts: 578 Likes: 1 |
For the best FL sizing die there is not substitute.
Dyin' ain't much of a livin' boy - Josey Wales
|
|
|
|
|
302 members (222Sako, 1Longbow, 12344mag, 1lessdog, 160user, 10Glocks, 35 invisible),
1,735
guests, and
1,178
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,192,750
Posts18,495,308
Members73,977
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
