Home Forums Gear Knives and Blades Benchmade knives

I have carried a Benchmade folder for over 27 years.
The carbon fiber scales have worn smooth.
I have used and abused it.

Recently, I chipped off 1/8” of the tip.
I sent it in and they reground the tip to look like new, cleaned and sharpened the knife and sent it back, for free.
How much is that knife worth ?
Almost 3 decades of service and it is ready for more.

If I ever buy another folder, it will be a Benchmade.

The above mentioned, 27 year old Benchmade, with re ground tip

That is an AFCK. Cutting edge, top of the line at one time and still an excellent knife.

I’ve actually settled on a ZT 0456 for my EDC and I’ve carried a bunch of different ones over the years. Been carrying this one for a couple years now. Love the heavy duty build of the blade on this one and even though I know better than using a knife as a pry bar unfortunately I still do it. I guess because I get in a hurry sometimes and I always have a knife with me. 🤷‍♂️ This knife rides in my pocket very well considering the size! I’m getting to where I like a little heavier duty knife for work applications. I have several ZTs and the 0801bw is a close runner up. ZT makes a helluva working mans blade in my opinion!

benchmade user for 20 yrs, currently have been carrying the bugout as an EDC and can't find anything not to like about it. if i lose it i'll buy another.

I just received a Mini Crooked River from the Custom Shop. That knife was so impressive I ordered a Bugout from the Custom Shop this evening.

So what is different about them coming from their custom shop? Sorry, I own a lot of knives but never have owned a Benchmade because I can’t seem to find any I think I’d like.

Smorgasbord. You get to build your knife to suit you. Choose your blade steel from several options, coated or not, serrated or not. Handle materials and colors, liner and screw colors, clip choices, ect. I have used the Buck Custom Shop for a half dozen 110's and now the Benchmade Custom Shop and the knives that come from the CS are not only exactly your own choices but the fit and finish is superb, the locks and actions perfectly timed with zero play, ect. You pay more because the knife starts at MSRP price and some of those choices have extra cost over standard factory offerings. As an example, upgrading blade steel will cost extra. At the Buck CS an upgrade of blade steel from the factory 420 HC to S30V or 20CV is a worthwhile investment in my opinion. At Benchmade I didn't upgrade from S30V to 20CV or M4 because it is a $60 uptick in price and for an EDC that will not be required to do any heavy duty chores it wasn't worth it to me. The Benchmade S30V will do a great job for the cutting these knives will do. Delivery within a couple weeks time from the order. Choices are fun!

The clip came off mine. I contacted the company to see if they could repair it for me. I got the snarky reply "Sorry, but we don't do service on those as they are discontinued." So I threw it in a drawer and bought me a SpyderCo.

How was that reply snarky?

I bought an AFO model and never cared for the knife. I didn't care for the action or the ergonomics. I bought the knife on line and would have never bought it if I had handled it first. I gave the knife away and have never missed it. I do understand they are very good at cutting up firearms.

seriously? That certainly does not match the response from them when I sent two 25+ year old discontinued knives back for service. In my case, they were very eager to fix both old times up as good as new.

I have one just like that. ATS34 steel

I know that I'm in the minority, but I've had back locks, liner locks, frame locks and Axis locks and I think that I prefer the original frame locks. It just seems like there's less to go wrong, no lint inside, no parts wearing, etc.

Frame lock here too. Simple and clean.

That's called marketing you stupid fugk.

Benchmade makes some of the best folders out there.

Period.

My EDC for the past 10 or so years is a min-barrage w/ orange scales and S30V blade. When I dress up for fancy dates, I carry a min-barrage with tan scales.

The S30V, sharpened to 22.5 degrees on a Gatco type sharpener has a near surgical sharpness and still holds it's edge very well. Very toothy that really slices well in whatever you're cutting.

Been carrying Benchmade for years, I really like my griptillian with the D2 steel, I have an infidel as well. Tough durable knives

Had a full 8 dog team of malamutes on the trail. About 1400 lbs of psycho. Had a female go into heat on the trail. Team was uncontrollable. They broke my sled into a spruce tree. A fight broke out between the female in heat and another dog.

Eventually repaired the sled, put the female in heet at the back of the team in wheel position. Tied the sled off to a ski doo skandik wide track and had the guy ride the break. Once he got me out of thick wooded section of the trail, out came the benchmade griptillian.

One hand on the handle bar, open that sucker one handed. Touched that blade to the tie off. That sled shot out like a rocket ship. Again, one handed, retracted that fkn blade fast as i could, clipped it back in my pocket, and held on for dear life. Only real one handed choice for a lefty. The axis lock is the best.

I couldnt begin to count the thousands of lbs of caribou, moose, beaver, sheefish and northern pike this griptillian has cut through.

Many years ago, had a loose cannon, violent, 6 ft 5 dude try to take a bemchmade knife out of my hand in anger. Cut his fkn finger off and told him to never try to take a knife from me again.

I can recall some tense moments where a benchmade knife prevailed.

That female in heet off to the right in wheel position: