|
Joined: Feb 2022
Posts: 1
New Member
|
New Member
Joined: Feb 2022
Posts: 1 |
Hello Lonny. I’d like a set of your leg mounts please. Just joined to contact you so can’t pm you yet. Could you contact me with the info I need to purchase a set from you? Thank you
|
|
|
|
Joined: Mar 2007
Posts: 604
Campfire Regular
|
Campfire Regular
Joined: Mar 2007
Posts: 604 |
I received my brackets last week and they are really nice. The welds are perfect, great product. Like most have done, I glued and screwed together 2 pieces of 3/4” plywood and sawed out my pattern similar to the plan that came with the brackets. The bench turned out really well. The top is very solid and has no flex at all as far as I can tell. There is no movement at all, front to back but one thing that I have noticed is that I have a slight side to side movement at the rear of the bench. I double checked the bolts and legs to be sure they were all tight but still have slight movement. The movement is noticeable with the rifle shouldered and on target. I’m using both front and rear bags and don’t have this problem with my permanent bench. I assume the movement is from having only one leg in the rear and may have to add another leg to the rear to stabilize it. Anyone else have this movement issue?
|
|
|
|
Joined: Nov 2019
Posts: 979
Campfire Regular
|
Campfire Regular
Joined: Nov 2019
Posts: 979 |
My old rifle club used three legged shooting benches with out any side to side movement. The benches were set for both right and left handed shooters, possibly the extra weight helped
|
|
|
|
Joined: May 2002
Posts: 15,622 Likes: 4
Campfire Ranger
|
Campfire Ranger
Joined: May 2002
Posts: 15,622 Likes: 4 |
Got my table and stool brackets today. Excellently done.
Thank you Lonny
"Chances Will Be Taken"
|
|
|
|
Joined: Jan 2014
Posts: 775
Campfire Regular
|
Campfire Regular
Joined: Jan 2014
Posts: 775 |
What type and Length bolts are you using to mount the brackets?
Are you using a washer between the bolt and bottom of table?
Looks like the bench will be 3" Thick when finished.
My guy who is building this is a super good wood working guy. He suggested Titebond Glue and finish with many coats of Teak Oil
Any other suggestions before I head to Home Depot ??
Just like all on here say, the brackets are amazing, packaging was amazing, shipping was very timely with great communication by Lonny. I HIGHLY suggest you get a set if you need a bench.
|
|
|
|
Joined: Jan 2007
Posts: 1,944
Campfire Regular
|
Campfire Regular
Joined: Jan 2007
Posts: 1,944 |
Got my table and stool brackets today. Excellently done.
Thank you Lonny Stool brackets?? Same as the bench brackets? Share please! Pm sent to Lonny on the bench brackets this morning
|
|
|
|
Joined: Nov 2019
Posts: 979
Campfire Regular
|
Campfire Regular
Joined: Nov 2019
Posts: 979 |
Ordered 2 sets from Lonny Really nice and packaged very well Jeff
|
|
|
|
Joined: Feb 2023
Posts: 1
New Member
|
New Member
Joined: Feb 2023
Posts: 1 |
Lonny, I’ve been searching for these. I joined this forum just to buy these. I would like to purchase these right away. I noticed in your photos the bolt pattern on the table are parallel to the edges, is there a left, right and one perpendicular? Being a new member, I’m unable to PM anyone. Can you please send a link to answerplease hotmail.com? Best Regards, Mel56 _________________________ If given a choice between right and kind, choose kind.
|
|
|
|
Joined: Jan 2006
Posts: 4,711 Likes: 1
Campfire Tracker
|
OP
Campfire Tracker
Joined: Jan 2006
Posts: 4,711 Likes: 1 |
|
|
|
|
Joined: Nov 2020
Posts: 1
New Member
|
New Member
Joined: Nov 2020
Posts: 1 |
I am in the same boat as Mel56. I'm interested in a set of these but I'm unable to send a PM. Can you email reynoldseg hotmail.com? Thank you, Erik_72 edit: I found your email a page or two back. I'll send you an email, Lonny.
Last edited by Erik_72; 03/13/23.
|
|
|
|
Joined: Feb 2003
Posts: 6,349
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2003
Posts: 6,349 |
I am the NorthEast WoodsBeast!
"System version 1.3, divorced"
|
|
|
|
Joined: Aug 2017
Posts: 9,148 Likes: 8
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2017
Posts: 9,148 Likes: 8 |
Highly recommend
|
|
|
|
Joined: May 2023
Posts: 1
New Member
|
New Member
Joined: May 2023
Posts: 1 |
If these are still available I'd love a set! For some reason the site won't let me private message. Mike
|
|
|
|
Joined: Sep 2006
Posts: 2,097 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Sep 2006
Posts: 2,097 Likes: 1 |
I have pretty much the same table except for attaching the leggs. Top is 1 1/8" car decking. 1 1/4" steel pipe legs and pipe flanges to hold on to the leggs, Just screw them in. [Linked Image] The wedges to fit the flanges to are 3/4" hardwood glued and screwed to the underside of the table and wide as the flanges are round. I'd probably have liked the welded leggs but I don't weld so good! Like the finish on that table. Cardecking is alright but a bit ruff! [Linked Image]
|
|
|
|
Joined: Nov 2003
Posts: 1,949 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Nov 2003
Posts: 1,949 Likes: 1 |
I will take two sets, if they are still available. PM following.
Bring enough gun and know how to use it.
Know that it is not the knowing, nor the talking, nor the reading man, but the doing man, that at last will be found the happiest man. - Thomas Brooks (1608-1680)
|
|
|
|
Joined: Jun 2023
Posts: 5
New Member
|
New Member
Joined: Jun 2023
Posts: 5 |
Lonny I could use a set of those brackets myself. I cannot pm you yet
Last edited by Larebow; 06/12/23. Reason: Misspelling
|
|
|
|
Joined: Aug 2020
Posts: 126
Campfire Member
|
Campfire Member
Joined: Aug 2020
Posts: 126 |
Any idea if you can ship up to Canada??
Proud Left hander!
|
|
|
|
Joined: Jun 2023
Posts: 5
New Member
|
New Member
Joined: Jun 2023
Posts: 5 |
Nice set of brackets went with 4.
|
|
|
|
Joined: Jun 2023
Posts: 5
New Member
|
New Member
Joined: Jun 2023
Posts: 5 |
What has everyone gone with for leg height. I've seen 32" mentioned but that's it.
|
|
|
|
Joined: Jun 2023
Posts: 5
New Member
|
New Member
Joined: Jun 2023
Posts: 5 |
I went with 3. I'm 6' tall
|
|
|
|
532 members (163bc, 204guy, 1lessdog, 1minute, 1badf350, 10ring1, 67 invisible),
2,533
guests, and
1,206
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,785
Posts18,515,843
Members74,017
|
Most Online11,491 Jul 7th, 2023
|
|
|
|