Home Forums Gear Free Classifieds Tikka .223 T3/T3X 2.55" OAL Magazines For Sale

Hello Everyone,

My name is Adam and my company is Ascension Industries. I was approached by a friend and member of this forum about a project that he wanted me to take a shot at. He explained to me the capabilities of the Tikka .223 T3/T3X series of rifles and how they were limited by the cartridge length restrictions of the factory magazine. I said I would gladly attempt to create a longer OAL magazine. After many attempts and fine tuning, we have came up with a working product.

This product is more of a "kit" than a full working magazine. What I am providing is a new magazine body and a new follower to accompany the new 2.55" OAL cartridge capability. All the purchaser must do is use the spring from their factory magazine and install it into the provided follower. It takes around 30 seconds after you do it a few times. I attempted to source magazine springs, but it was not very easy to source the springs and getting them produced was not fiscally feasible.

This product is 3D printed and it is printed out of PLA-CF (PLA Carbon Fiber). This material is tough, but will see deflection at around 131*F. That being said, I do not recommend anyone leaving these magazines on the dash of their vehicle in 110* summer heat. If you do though, I am offering a lifetime warranty on this product. If you run it over with the truck, covered. If you leave it on the 50lbs of tannerite that you shoot on the 4th of July, covered.

I will be charging $40 dollars shipped for each magazine kit. I will be accepting payment thru paypal. I look forward to hearing feedback from everyone who gives the product a chance. Please do not hesitate to ask any questions. Thank you to everyone in advance.

Adam
Ascension Industries
Matthew 6:34

Nice work. I don’t have a Tikka anymore, but have you considered doing the same for the Howa mini- actions? Say a flush mount magazine?

These are good to go. Mine has been excellent.

I had not thought about the howa’s.

This is all new to me so I am not familiar 100 percent yet with the needs of the market. Shoot me a direct message and we can talk more if you would like. Thank you.

Tag

Also, my e-mail is AscensionIndustriestelepage.net

PM me ... I want one.

I’ll take 2!

Please E-mail me at AscensionIndustriestelepage.net so I can get your order in.


I accept paypal, cash/check. Thank you to everyone. I really do appreciate it.

Please e-mail me and we will get the order started! Thank you sir!

Tag

Good idea! Might need to finally pull the trigger on a tikka 223 now!

Tag

I appreciate all of the orders from everyone. Please do not hesitate to contact me with any questions.

Do you have to use a different bolt stop?

Thanks

Tracy

No

Bearcat74 is correct. The only thing needed is your spring from your factory mag put into the follower included with the kit.

Everyone please be aware, I am changing my e-mail to receive orders to AscensionIndustriesOrdersgmail.com - THIS WILL ALSO BE THE PAYPAL EMAIL ADDRESS FOR PAYMENT

This will help me keep up with orders specifically much better and allow me to respond to general inquiries much easier. I thank you all for your understanding and continued business.

Tag

I’ve been waiting a year and change on my Mountain Tactical .223 mags.

Getting tired of it, Jeff.






P

Tag