Home Forums Hunting & Shooting Rimfires Cz 457

Got a 457 22 mag went to install some rings and all mine are to wide will not tighten up
On the cz rail
Is there a specific rings to use on rim fire rails
And what brand recommend thanks

Unless you have a really large front bell on your scope, The machined Weaver Medium Rimfire rings work fine on a CZ. Just about every Wally World has them for $10

Thanks

Your rifle will require the 11mm dovetail mounts. I buy the ones that fit both the 11mm and 3/8", that way I can use them on just about any rimfire dovetail mount. I bought a cheap set off of ebay, and they work well. I prefer them over the cheap Weaver type. Those always seem cheap to me. There are also Warne, but they are quite a bit more money. Good solid rings though, and trimmer looking`.

This is what I'm running:

Scope is a 4.5-14x42

Here's what the Warne rings look like:

Rifle: Winchester model 320

I got a cz mount that you use regular rings on for mine. I went with the 15moa slant to be able to use more of my scope. Pete's Pillars has everything you will need for the 457

Leupold 11mm on mine. Nice rings.

Unless I need some tilt built in for LR, I much prefer the neat appearance of standard rings over a rail. Had a couple of rails, but one (forget which) occasionally bounced empties back into the action.

Thanks for all great info

Bkl makes some nice aluminum rings for the cz 457, in both inch and 30mm

These work great also.

https://www.amazon.com/UTG-Airgun-Picatinny-Weaver-Adaptor/dp/B007BNHFLQ

Thanks

Sportsmatch

CZ aluminum 11mm rings are OK but a bit bulky.
Burris Signature .22 rings are a little more refined.