Home Forums Gear Free Classifieds F/S aluminum Trigger guard for Remington 600 / Mohawk 600 / 660

Hi Ken,
Sorry it has taken me so long to respond, I've been away from my computer and I haven't been getting Email notices of activity on this thread.
The only change I made to the second run I did was change the depth of the front counter bore, I made it deeper by .05 of an inch. (easier to grind a little off the original screw than to find a replacement)
The only reason I did this was that I had two feedback responses of customers not being able to start the front screw or afraid that there was not enough thread contact to feel safe.
I only have one plastic trigger guard that I could model from, And the hole depths are as close to this Plastic model(minus the .05 now)that I can get from molded plastic.
The rear hole is the same as my plastic one,as far as depth goes, however I did increase the diameter of the hole a little, the reason for this is to accommodate for all the different stocks out there, the plastic would warp enough to allow for this misalignment. and this is the first complaint that I can recall on that hole, for that reason.
If you "break" or damage your trigger guard due to a flaw in my part, I will gladly replace it or refund your money.
If others are finding problems with these trigger guards, I would appreciate as much feedback as possible,so that I can make changes and produce as flawless a part as I can.
If you need a different front screw, a good hardware store should sell a 1/4-28 socket button head that would work nicely.
And if you are uncomfortable with tightening the rear screw , you can get a thin metal washer to put under the screw. (thin so that it will conform some to the angled shape of the screw)

ttt

I will ship 1st class mail for $4.00

BTT

alloy ribs as well as steel ones are available from Heritage Arms Inc. Perfect fit. they also offer the trigger guards and a real simple bolt release kit for the 600's

BTT

BTT

BUMP

From now until the end of the year, Mention you saw it on the campfire and get it for $65.00 with free shipping to the lower 48.

Merry Christmas!

Oh! and my address is.......
Coquille Valley Machine Works
54511 Arago-Fishtrap rd.
Myrtle Point, Oregon 97458

TTT

Just saw your Holiday Deal and $65 shipped is none too shabby. I'll have to get a money order in the mail tomorrow.....

JPro,
your trigger guard shipped Monday, the 4th, via first class mail, you should have it before the end of the week.
you can track your package here http://trkcnfrm1.smi.usps.com/PTSIn...y.do?origTrackNum=9101150134711003047822
Thanks,

Bump

TTT

Bump

What is the current price?

$75.00 free shipping

IS THERE ANYBODY OUT THERE? THERE, there, there, there.......?

TTT