Home Forums Reloading Varmint Rifles Don't Tell Anybody Else - I Bought A Tasco Scope!

I am perusing my local sport/pawn shop yesterday when out of pawn comes a minty looking Tasco 6x24 power variable scope.
It had been on a Rifle but the proprietor prefers to sell the scopes and Rifles seperately.
So the scope was removed and set inside its original box (marked $86.95).
The scope had Weaver rings and bases with it and a set of Butler Creek flip up, see through, lense caps.
My main man said he would sell the whole shebang to me, for $40.00 cash.
I burped that up rather quickly, after, inspecting the scope.
I mean what can you do to inspect a used scope.
I took it outside and got my huge Dog-Gone-Good "X" type sandbag out of the VarmintMobile and set it on the hood.
I clamped the scope in the bag as tight as I could then I checked the scope for parallax adjustment, elevation and windage movement, focus and also gave it an intensive all over look see.
It seemed to pass all the casual tests - and I bought it.
Now this evening after returning from a short Varmint Hunt I mounted the scope on a newish (new to me but slightly used) Remington 700 VS in 220 Swift.
I made up some ammunition for the new to me Swift using 52 gr. Sierra bullets, IMR 4064 powder, Federal Match primers and W-W brass.
Soon I will take the newish Swift and the newsih scope to the range, the next wind break I get.
I hate to try and "test" 2 (two) things on a Rifle at once - in this case I am actually testing 3 (three) things. The Rifle, the scope and fresh handloads.
Wish me luck in that endeavor.
This is actually the third Tasco 6x24 scope I now own. I have had two of them for about three years now and they all have the Du-Plex with mil-dot type reticles.
The other two Tasco 6x24's have worked rather well for me. They hold P.O.I. and are rather clear of image up to about 21 - 22 power then they start to gray-up or dim slightly.
I am just testing this new Swift Rifle - if it shows any promise accuracy wise, I will keep it and put a high quality scope on it soon as I can afford one.
And "affordability" is why this $40.00 Tasco, rings, bases and lense covers followed me home.
The price of Leupold scopes anymore is getting on my nerves.
The Leupold scope I want for this Remington 700 VS in 220 Swift (should I decide to keep it) will cost me more than what the Rifle did.
If the Swift shoots these test loads under .900" (5 shot at 100 yard groups) I will probably keep it and get serious about it.
My next Gunshow is coming up in Missoula in 3 weeks or so.
So the Swift has three weeks to impress me somehow.
I have to laugh at myself - when I was fianl adjusting this Tasco scope to my eye I sub-consciously made sure the scope became "clear" when the big white lettering on the eye-piece spelling out T-A-S-C-O was turned down toward the action. I wouldn't want anyone to see me out at my range with a Tasco scope on a Rifle.
I mean I am not "VAIN" to a very great extent but I do have an image to keep.
You know what I mean - don't ya?
Hold into the wind
VarmintGuy

Well VG,

I have some TASCO bigger powered scopes, and while no Leupolds, they have done a good job, and are clear enough for my eye sight to do the job...

While I like a Mercedes, sometimes a plain old Chevy will get the job done...

Sure, TASCO, SIMMONS and some of the other companies with Lower Cost Scopes, like some of the Bushnell products, make low end scopes that are junk to anyone for a 12 yr old with his first 22 LR...but they also make some that are actually pretty darn decent..they do the job with 85% to 95 % of what a Leupold etc will do, for 15% of the price...

If God blessed me as a rich guy, I'd have pretty much nothing but Leupolds on any of my rigs... but since he didn't, some days I live just fine with Tascos, Bushnells, Weavers and some Simmons..

I have 5 or 6 Simmons 4 x 4, in 4.5 x 14s..
they are a good scope...

I don't mount them on say a 300 Win Mag..
but for service on a 10/22, or a 17 or 22 Mag in a Marlin or Ruger, they are more than plenty good enough...
throw a little $25.00 Stony Point target turrent on top.. and do the job just fine..

I just wish fewer guys were 'scope snobs' among our numbers....I just don't understand the mind set... why do some of us look down on those that Tascos might be the best that they can afford... or they might be more than plenty for guys whose eye sight isn't exactly Leupold quality any more itself ( like me for instance).....

I'd bear no guilt about having a Tasco especially picking up a good scope for the job at hand, that only set me back $40.00...

how much we spend doesn't always equate to the amount of quality we just bought... my last scope that went south was a $350.00 Weaver V 24... it lasted 600 rounds or less on top of a 223, shooting bullets at 22 Hornet velocity...

the rifle lived with a used $50.00 Tasco 6 x 24, while it took me about 6 months and a lot of correspondence to get the Weaver replacement for a scope that was less than 30 days old..

the $50.00 used Tasco more than survived the season and also accounted for plenty of sage rats in the process...

and lets don't even discuss the $150.00 ER Shaw 223 barrel on that rifle...a few guys shot it and nailed sage rats at 250 to 300 yds, and when they asked what brand of barrel was on it, I told them it was a Krieger... and they went off on a verbal tangent of what great quality Krieger makes and how it is worth every penny of their asking price...

on actually using stuff, I often wonder how many guys don't have a clue the difference in performance from a low dollar product to a high dollar product...
most can't apply the extra 'quality'.. because the week point is their shooting skills and abilities..

cover up the Tasco markings and when people ask, tell them it is a new Leupold offering... they really won't know the difference in most cases...

I think you will be pleasantly surprised with your Tasco. I have 2 of the 4-16-40AO world class scopes. One is on my 10/22 and 1 is on my marlin 922M. They are extremely clear and bright and hold zero. What more can you ask?

This weekend I mounted a Tasco 3-9x40 World Class I've had since I was a teen.No it's not a Leupold, or a Weaver, which are the two scopes I mostly use, but it is bright enough, and has never once lost zero, even on some of the hard kickers I liked as a kid.Don't know how much stuff I've killed looking through that scope.Its now on my Knight, so I'll hopefully add a few more kills to it.

If it works for you, why not use one? After all, you are the only one you have to make happy with your optics choices. One of my hunting friends (who is as knowledgeable as any rifleman I know) actively searches for good used Tasco World Class scopes and has quite a few of them mounted on a variety of rifles. Never owned a Tasco myself, but I have used several comparable Bushnell and Weaver products over the years with good results.

I have a tasco 3x9x50 that is 24yrs old Its been sitting around for yrs Got a custum mauser98 in 257 bob It was as clear as most scopes and held zero fine the combo is awsome a real plesure 2 shoot and carry and exstrem. accurate thanks marty

I've got one of the early world class 2-7s that were made in the Phillipines. Much better scope than when they went to china with production. It's not up to my 4200 or VXIIs but it works fine for any normal hunting.

VG - look on the tube just ahead of the eyepiece. You might have lucked into a NICE piece of glass. The 6-24x42 Tasco World Class on my 220 Swift has the letters "JAPAN" imprinted on the tube. Very nice glass.

A couple of other Tasco and Bushnell scopes I own have the letters "JAPAN" and "BL" in an oval imprinted on the tube...now...THOSE are very nice scopes.

cool mine is made in japan thanks marty

I have 3 of the 6-24 varmint scopes with the mil-dot/duplex reticle. The first one has been an older Savage 110 (not 10) in .223. The rifle has a short, heavy barrel and was a model called the "4 x 4." It shoots 1/4- 1/2 inch groups regularly and has held zero all these years. It does get a little less clear at the high end of magnification, but I just can't get around to changing it out. Based upons its performance, I bought 2 others. One is on a .17 HMR CZ-452 and the other is on a Kimber .22 LR bench gun that I got from the CMP. I have more expensive scopes, but these work very well - especially when I look at what I paid for them!

You probably bought the Tasco scope I sold. I had a coyote in the crosshairs and missed it cleanly 2 or 3 times at around 200 yards. It turns out that in a few days the scope had gone from being one or two inches high at 100 yards to 9 or 10 inches high.

That said, I have several Tasco scopes that have performed well but I don't trust them like I used to. A couple were bought REALLY cheap and they weren't even taken off a rifle; they were brand new.

You may also know that Tasco is now owned by Bushnell. What this means is that the warranty is probably pretty worthless but, if the scope is cheap enough, you probably won't care.

Varmint Guy
I just put the garbage out this morning. In it was a 6-24X Tasco
that was always milky above 18X. I sent it in to the factory and they refused it because it was manufactured before the company was sold to Bushnell. They said they could not repair it. I tossed it.
It was on my son's .223 prairie dog rifle and maybe I will have better luck with the Weaver 15X target scope?
I also have a 6-18X Simmons and it has been a good scope so far.
So please don't call me a scope snob.
I wish I had never sold my old Redfield target scopes, the 8X with the dot reticle was my favorite and the 12X with fine crosshairs was not bad either.
Good Luck with your Tasco!

whelennut

Whelennut: Yes I have noticed that attribute of the Tasco 6x24's - they do darken up at the highest powers!
I notice it in mine at 21 or 22 power.
STILL I can shoot targets and Varmints during daylight hours with them.
The comparable Leupold scope is an 8.5x25 variable and they start at $650.00 or so - in other words OVER 16 (sixteen!) times the amount I paid for the Tasco!
I own 3 Leupold 8.5x25x40mm scopes and they are, IMHO, one of the best Colony Varminting scopes EVER made IF NOT the best!
I actively shop for them on the used market (as they are no longer made by the fine folks there at Leupold & Stevens).
Yes "I" am a scope SNOB!
And I am somewhat shamed by that!
BUT being a scope snob has become entirely to expensive for me to continue on, as!
I have a couple of Simmon 4x12 scopes on 22 rimfire Varminters. These are on Rifles I use as "learners" and or "extras" when folks come into town with no armaments.
They have worked well for many years for me and I have directed literally dozens of folks to buy and use this model of Simmons scope on their 22's.
I think they were about $60.00 each but they were clear and consistent and looked good - they had a red ring where the gold should be - but so what - they work.
Sadly last year I was informed when I went to buy a new one that that particular model Simmons 4x12 had been discontinued.
My man "Joe" who has sold those scopes at Gunshows around the northwest for 25 years (he estimated) was visibly and admittedly sad that Simmons discontinued that scope.
He relayed he sold more of that model scope than any other he had ever carried!
I will live with the "darkening" or milkiness like you mention for 1/16th the cost on my "no-critical" use Rifles!
Times are hard out here - even for a scope snob.
"Hi everyone - I'm VarmintGuy, I'm a scope snob".
Step one.
Hold into the wind
VarmintGuy

Seafire: I take your gentle admonishment about my snobishness to heart.
There are times I wish I were not a scope snob!
But I cut my teeth on centerfire longer range Varminting by using all manner of Unertl Varmint (and target scopes)!
I mean these things were beyond clear they were BRILLIANT and dependable.
Sadly I have taken my profits from all my Unertl's and only have one left - a BV-20!
When I really want to feel superior (I say this in jest as a recovering or struggling scope snob!) I bring out the Rifle the BV-20 is mounted on and I just look at things through this splendid scope!
I have still not shot the new Tasco scope as yet but as soon as the winds calm I am going to get that done.
Krikey! They are predicting snow for the next couple of days here in SW Montana.
Yes's on the Simmons and Tasco scopes and there applications - see my other recent post!
I scour pawn shops and gunshops where ever I travel and look for used scopes that are "good buys".
And I look especially carefully for old Redfields as they can sometimes be purchased very righteously.
Thanks for the gentle bashing - I needed it.
Hold into the wind
VarmintScopeSnob uh, uh, I mean VarmintGuy

Odessa: Did you read the part of my posting where I purposely adjusted the focus so the word T-A-S-C-O was unreadble by other folks?
I am sick.
Yes these scopes work but they are CHEAP!
I don't like folks to know I have a CHEAP side to me.
I have EVEN considered taping a phoney, (or a real!) tiny ballistics chart over the word T-A-S-C-O on my Tascos, so folks won't readily recognize the brand - I think my "problem" is more ego based than reality based?
I remeber about 10 years ago I bought my first Tasco 6x24 scope - I had it for awhile and when another scope came along and I replaced the Tasco. I sold the 6x24 Tasco at a gunshow to a young Army Ranger (the show was near Ft. Lewis, Washington). At the next gunshow there abouts who do I see walking towards me with intensity of purpose written all over that young Rangers face but the "gentleman" I sold that Tasco to.
My first thought was I have never been beaten up by a Ranger, but, alas, he had come over to thank me for selling him that scope and how well he liked it!
I was relieved and happy that I had made the young soldier a good deal on that scope.
I tell you one line/model of scopes I really enjoy and think they are a great scope is the Weaver V-16 model. I have several of these and bought my first one for $200.00 new. They are up to $260.00 now but are still an excellent value and an excellent scope.
Kudos to Weaver.
I mean Odessa, I Hunt with guys who use Varmint model high dollar Zeiss, NightForce, Bushnell 6500's and models of Leupold scopes I could NEVER afford! IMAGINE how I would feel if they saw me shooting a Tasco???
I could die of embarrassment or something.
Hold into the wind
VarmintGuy

Yep Varmint Guy, I read the part about how you made the word T-A-S-C-O unreadable. Somehow (after reading plenty of your posts on the Campfire) I don't think you would really give a rat's azz what anyone thought of what you were using (scope, rifle or bullet choice). I feel the same way; I am long past caring what anyone thinks about what I do, especially with my hunting and shooting hobbies. You hold into the wind too. Odessa

I've messed with enough Tasco's that the moving the POI via the dials was a roll of the dice and you never knew where it would be. Once you hit the lucky combination you dare not touch things. I'm too poor to afford junk. YMMV.

Kinda like riding a moped?

LOL now what kind of attitude is that. Oh one that works!

That's funny because I have the exact same scope as the one VG just bought, and it happens to be the most consistent-tracking scope that I own.