Home Forums Gear Free Classifieds Bansner Stock for Model 70

Want to sell a Bansner High Tech Specialties for a long action Model 70 (30-06 length). Found a nice feather weight stock and going the wood route. Stock is inletted for a blind magazine. This is about the lightest stock setup you can get for a Model 70, no heavy bottom metal required. Included is an Aluminum trigger guard and bottom piece to keep the spring in the correct location (goes inside the stock). I've already done all the work to this stock. It's been sanded, shaped, and finished. Action was bedded so all you may need to do is re-bed where the barrel comes off the action. Action bedding is very good. Declerator pad installed to 13.5 LOP. Painted olive green with textured paint. $315 shipped. Thanks, Jeff.

Jeff,
what is the weight of the stock ?

cheers
Peter

This is for a post-64 Model 70??

Stock is 27 oz. as finished.

Yes, it's for a post 64, Model 70 Classic.

barrel channel--featherweight or sporter?

Does the 27 ounces include the recoil pad and trigger guard?

Sporter barrel channel. I've got a number 3 barrel and it could be opeded larger if you wanted.

27 oz includes pad and guard...it's as finished.

How about $300.

JAB where in AK are you located?I think it might work with my 375 but would be nice to checkit out if we're in the same area.I'm in Sterling.

Thanks Judd

Shucks--I've got a featherweight contour.

bump for a good stock

Bump for a friend

Dakota, it will sure fit a feather weight contour. Let me know if interested.

Still available at $300.

Bump

Reduced to $285. You guys are tough. I thought this would go much sooner.

Consider it sold based on our PM's. Payment will go out Thursday. Thanks.

Glad somebody finally grabbed this, I was about to buy it and didn't even have a gun to put it on! Can't believe it lasted this long.