|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
Thanks Rick , this new area is a good idea. I shoot more paper than anything else, it's good to have a place for it at the campfire. I've been knobdicking with 210gr Berger VLDs in my heavy 30-06 recently. Ran a handful over the chrony using 60gr RL22 and was getting aound 2740 fps. Loaded up a second batch with 61gr RL22, and put them downrange yesterday, on paper at 100 yards. Results were very good. Average velocity was 2795 fps, at a quickload calculated pressure of 63k. I weighed the water capacity of my cases and factored that into the equation. Seating was set at 3.32" COL to kiss the lands. These shot very well. I put a 7-shot group on paper. A wide shot at 9 o'clock opened the group up a bit, but it was a called flyer. I think this combination will shoot consistently sub .5 moa, when I don't pull shots. 5 of 7 went into a tidy .309" c/c group. I've got the itch to try 1000yd BR, and this load just might be worthy. I'm going to roll another lot, and try them at around 500 yards. Here's pics. And an external ballistic calc.
Tabular trajectory data at Non-Std. Atmosphere
Gunsite altitude : 4000 ft.
Air density : 0.067848 lb./ft�
---------------------------------------------------------------------------------------------------------------------
Gun / Ammunition : .30-06 Spring.
Bullet : .308, 210, BER VLD
Bullet weight : 210 grains or 13.61 grams
Muzzle velocity : 2795 fps
Crosswind speed : 10 Mph
Ballistic Coefficient(s) (G1):
C1=0.629>0 fps;
Optimum trajectory information : Max. point blank range (P)=293 Yds. with a
zero range set to (X)=249 Yds. and max. ordinate above LOS at range (M)=142 Yds.
-------------------------------------------------------------------------------------
Sight-in clicks, 1 click = 2.66 cm/100 yd. or 1.047 in/100 yd.
Height of sight above bore axis = 4.83 cm or 1.902 inch
Gun is zeroed-in at 100 yards, by
sighting-in at level firing
-------------------------------------------------------------------------------------
Range Velo Time of Energy Path Deflection Total Sight correction Target
city flight to at crosswind drop for setting new lead
LOS of 10.0 Mph zero range 33 fps
-------------------------------------------------------------------------------------
�Yards fps s ft.lbs. in. in. MOA in. Clicks MOA yds �
-------------------------------------------------------------------------------------
| 0 2795 0.0000 3643 -1.9 0.0 ----- 0.0 ------ ----- 0.00
M 90 2679 0.0992 3348 0.0 0.5 0.48 1.9 0.0 -0.03 1.08
X 100 2667 0.1104 3316 0.0 0.5 0.52 2.3 0.0 0.00 1.21
P 200 2542 0.2260 3013 -3.0 2.0 0.95 9.6 +1.4 +1.44 2.47
| 300 2421 0.3460 2732 -11.2 4.2 1.34 22.0 +3.6 +3.59 3.78
| 400 2303 0.4728 2473 -25.4 7.6 1.83 40.5 +6.1 +6.09 5.17
| 500 2188 0.6071 2233 -46.4 12.4 2.37 65.7 +8.9 +8.88 6.64
| 600 2077 0.7482 2011 -74.6 18.3 2.92 98.1 +11.9 +11.89 8.18
| 700 1969 0.8956 1808 -110.4 25.4 3.46 138.2 +15.1 +15.08 9.79
| 800 1863 1.0503 1619 -154.9 33.7 4.03 186.9 +18.5 +18.50 11.49
| 900 1762 1.2172 1448 -210.5 44.2 4.69 246.7 +22.4 +22.35 13.31
| 1000 1666 1.3945 1295 -278.0 56.5 5.40 318.4 +26.6 +26.56 15.25
|
|
|
|
Joined: Jan 2001
Posts: 11,833
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 11,833 |
Shane,
It looks like it will work. What were your extreme velocity spreads?
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
2771 and 2818 (48fps), with the 61gr charge. The 60gr charge was 2731-2746 (15 fps). I'm going to drop back to 60gr.
|
|
|
|
Joined: Jan 2001
Posts: 11,833
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 11,833 |
The 60 grain charge looks promising. If you haven't done this yet, you might try increasing neck tension on the 61 grain charge.
Alos, I tightened my 6.5x284 groups form 5/8 to 3/4 to under 1/2 inch by turning the necks and getting consistent neck tension.
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
The 61gr load is already running between 63-64k psi, I'm kinda leary about spiking it up higher by increasing neck tension.
The 60gr load runs at 60k, and seems pretty consistent on the first batch. I don't have the chamber or tools to really take advantage of neck turning. And I haven't been bitten by the bug that hard yet.
I'm going to get over to one of the 1000 yard matches at Missoula this summer, and work within the constraints of my current equipment. I know my gear is not the optimum (30-06, 10x scope, tactical stock), but it should get my toe in the water, and be a lotta fun to boot.
|
|
|
|
Joined: Jan 2001
Posts: 11,833
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 11,833 |
You can try neck tension on the 60 grain load. I too chose a low-end load for my 6.5x284. 51 grains of H4831SC gives me 2875 fps. Interestingly, if I drop the neck tnesion by using a bushing .001" larger, I lose 35 fps.......
|
|
|
|
Joined: Feb 2004
Posts: 479
Campfire Member
|
Campfire Member
Joined: Feb 2004
Posts: 479 |
Speaking only for myself, as one who will probably never shoot any kind of competition, I'm learning from these open discussions and information exchanges by actual competitors. Thanks for the education!
|
|
|
|
Joined: Jan 2001
Posts: 11,833
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 11,833 |
22,
Be very careful! That was the same way I got sucked-in to all this.......... <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
Yeah, what Blaine said.
Fact is I haven't shot in a BR competition myself either, but will this summer.
|
|
|
|
Joined: Jan 2004
Posts: 10,915
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2004
Posts: 10,915 |
Shane, From a fellow lefty, and 30-06 fanatic, that is some fine shooting!!!! Thanks for sharing with us.
Huntr
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I put together another 10 to test at longer range. Waitin for the wind to ease off a bit.
|
|
|
|
Joined: Dec 2002
Posts: 15,888 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 15,888 Likes: 2 |
Blaine, did you go with a tight neck when you had your rifle chambered, or did you use a standard reamer? Curious to what the long range benchrest boys play with.
|
|
|
|
Joined: Jan 2001
Posts: 11,833
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 11,833 |
I think my rifle's neck is about .295, based on case springback. The reamer was marked .298, but there is no way a .298 neck would yield fired necks that measure .2935 to .294.
.295 is a good diameter for Win brass, which measures .294-.295 unturned with a 142 SMK. I have heard you want between .002 and .005" clearance between the case neck of a loaded round and the chamber.
Now there are guys who like a tight neck, like .290 to .292. There is a lot more variation in that sort of stuff in the 1000 yd game.
|
|
|
|
Joined: Jun 2002
Posts: 11,117
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2002
Posts: 11,117 |
from a lousy, stinkin' .30-'06? you've got to be kidding, right? (hee). nice shooting, especially considering you weren't comfortably benched. thanks for the pics, and thanks, you guys, for these new threads. i'll probably never shoot competition but i do enjoy these discussions. then again: 6.5x55 or .30-'06? aarrgghh!
abiding in Him,
><>fish30ought6<><
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I shot the 60gr load at 520 yards today. Group was looser than I was wanting to see, but I blame that on the operator more than the equipment. I wasn't in a good tight position. I applied dope for an estimated 475 yards, via mildot master, and cranked .75moa left windage (didn't need it). My range "guess" was about 45yards short, so shots went low. Here's a couple pics.
|
|
|
|
Joined: Dec 2002
Posts: 15,888 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 15,888 Likes: 2 |
I imagine that wind plays hell moving thru them hills <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />
|
|
|
|
Joined: Apr 2004
Posts: 4,278
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2004
Posts: 4,278 |
Very nice groups, I would give it a try. Your groups will probably be a little better off a concrete bench that are a lot of matches.
Lefty
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
We get wind here, but not as bad as other MT locales I've lived in more in the central/eastern part of the state.
5-10 mph is pretty normal here. It gets up in the 20s-30s with gusts to the 50s at times, but that kind of wind generally only lasts a few hours. Usually a cold or warm weather front moving in.
|
|
|
|
Joined: Apr 2004
Posts: 4,278
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2004
Posts: 4,278 |
Montana,
The country around there just makes me drool. How come its not all white? What part of Montana are you in?
Nice shooting BTW.
Lefty
|
|
|
|
Joined: Jan 2001
Posts: 5,794
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2001
Posts: 5,794 |
Montana, try a hotter primer for the RL 22. I have great results with the CCI 250 in the .30-06 and 200-220 grain bullets with RL 22. I've tried all kinds of standard primers and they just didnt' cut it for my climate (Utah) or I got SD's of 50 fps or more. The hotter primers cured all that. Keep working that load. I think you have a winner. Flinch
Flinch Outdoor Gear broadhead extractor. The best device for pulling your head out.
|
|
|
|
528 members (12344mag, 10Glocks, 160user, 1234, 17CalFan, 10ring1, 54 invisible),
13,620
guests, and
941
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,120
Posts18,542,230
Members74,057
|
Most Online21,066 May 26th, 2024
|
|
|
|