Here's an update on my progress with this Rem 760 project:
-Thorough chamber cleaning and polishing with an electric drill
-Discovered that the 760 has a large chamber
-Neck sizing new fire formed Remington and Winchester cases
Good news: I've fired some 60,000 psi loads using new full length sized brass and once fired neck sized brass without any sticking cases!
Bad news: It's still regularly hanging up on the action bar lock. However, it's easy to free up since the cases are no longer sticking.
This leads me to believe I had a combination of things going on:
-rusty/dirty chamber
-sizing & age of brass
-action bar lock issue
Numrich has a new action bar lock and spring. They were pretty cheap so I went ahead ordered them. Not sure that's going to solve the problem, but we'll see. Anyone have any suggestions?
JW
Last edited by wootenj1488; 01/06/12.