|
Joined: Oct 2008
Posts: 8,748
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2008
Posts: 8,748 |
Brad, do you just use a spray degreaser?
After my experience this year I want to go through the trigger and bolt and get them cleaned and re-oiled.
|
|
|
|
Joined: Feb 2006
Posts: 43,901 Likes: 11
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Feb 2006
Posts: 43,901 Likes: 11 |
Sam,
Can't you just use a gob of Loctite on the buggered screw and it will fill up the threads enough to hold anyway. I don't expect that screw has much load on it during use. DD, that's what I did. The new allen wrench was just big enough to snug it up without stripping. Should never be an issue unless for some reason I decide to try and back it out.
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
prm, I use spray Auto Brake Cleaner.
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
Sammer, when you mentioned stripping the set screw, I had a suspicion you might have had an undersized allen... glad to hear it worked out!
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Sep 2004
Posts: 453
Campfire Member
|
Campfire Member
Joined: Sep 2004
Posts: 453 |
[quote=sigguy] It would be great if there were a sticky on how to get your Montana in shape!
Well, FWIW, here's my ritual: First:.....] This is awesome. Thanks. Off to hunt this weekend with the Montana. Right now it is a 1" to 2" rifle; good enough for government work!
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Sep 2009
Posts: 13,860
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2009
Posts: 13,860 |
Kimber will sell the screw as well... Hey, that really doesn't sound quite right. No it sounds most apropos. They are used to seeing folks holding their ankles.
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
I see you're deep in the bottle...
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
One more thought...
I've seen more than one Kimber barrel settle into consistent shooting once the round count has passed the 100+ mark. Obviously doing the barrel-break-in-thing can speed this up a bit. Not every Kimber barrel I've seen needs over a 100 rounds to settle down, but I've seen it enough to think there's something to it.
And unlike the one usual expert who posts on Kimber MT's, I've learned what I've learned with far more than a "sample of one."
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Jan 2001
Posts: 1,560
Campfire Regular
|
Campfire Regular
Joined: Jan 2001
Posts: 1,560 |
I found mine good and snug, but a little passionate pink finger nail polish was added to make sure it stays good and tight. Thanks Brad. CP.
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
Chris, you're welcome!
Hope you have a good opener next weekend...
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
Forgot one other thing... when the stocks are out of the mold and the recoil pads glued on, sometimes a vacuum is created from the heat of the cooling stock. On many Montana's (obviously not on the wood models) you'll find the recoil pad "dimpled" (sucked in) and slight deformed from this vacuum effect. The simple way to release the vacuum is take a sharp, longish push-pin or heavy sewing needle and poke through the outside of the recoil pad in a couple spots above and below the Kimber logo on the butt end of the pad. Over a few days (up to a week), the pad will go back to its original form.
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Jul 2009
Posts: 2,875
Campfire Regular
|
Campfire Regular
Joined: Jul 2009
Posts: 2,875 |
Forgot one other thing... when the stocks are out of the mold and the recoil pads glued on, sometimes a vacuum is created from the heat of the cooling stock. On many Montana's (obviously not on the wood models) you'll find the recoil pad "dimpled" (sucked in) and slight deformed from this vacuum effect. The simple way to release the vacuum is take a sharp, longish push-pin or heavy sewing needle and poke through the outside of the recoil pad in a couple spots above and below the Kimber logo on the butt end of the pad. Over a few days (up to a week), the pad will go back to its original form. A 20 gauge hypodermic will eliminate the dimpling within seconds; did for me.
Retired and Loving It!! ΜΟΛΩΝ ΛΑΒΕ
|
|
|
|
Joined: Nov 2005
Posts: 4,378
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 4,378 |
|
|
|
|
Joined: Oct 2000
Posts: 30,286
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,286 |
Don't know if this has ever been discussed, but I experienced something yesterday I've never seen with any of the 10 or so Kimber MT's I've owned.
Had a small, threaded, set-pin back-out, not allowing the bolt to cycle.
I took the pin out, degreased it, blue loc-tighted it and re-set it. A dab of nail polish on top sealed the deal.
I doubt I'll ever have another problem, but an ounce of prevention is worth a pound of cure. Certainly wouldn't want to have discovered the issue with a 340 bull staring at me... Somehow the photo got moved... here it is back.
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Jan 2005
Posts: 22,884
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2005
Posts: 22,884 |
Thanks again for sharing this info.
|
|
|
|
Joined: Jan 2007
Posts: 20,812
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,812 |
I've had three Kimbers of which two had the problem.
laissez les bons temps rouler
|
|
|
|
Joined: Oct 2011
Posts: 2,926
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 2,926 |
To the top with this one again...
Experienced light primer strikes at the range today w/ my 84M, remembered this thread and used my "google fu" to find it. Followed Brad's procedure, everything seems Kosher now - firing pin protrusion is 0.055.
Added this to my "watched topics" for future reference.
Thanks Brad...
David
|
|
|
|
Joined: Jan 2008
Posts: 17,314 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2008
Posts: 17,314 Likes: 1 |
There is a recall list if you google it.
Screw you! I'm voting for Trump again!
Ecc 10:2 The heart of the wise inclines to the right, but that of a fool to the 24HCF.
|
|
|
|
Joined: Oct 2011
Posts: 2,926
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 2,926 |
There is a recall list if you google it. My rifle was on the list, they checked it and it was in spec - what does that have to do with this? David
|
|
|
|
546 members (1beaver_shooter, 1234, 17CalFan, 007FJ, 01Foreman400, 160user, 60 invisible),
2,388
guests, and
1,274
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,380
Posts18,488,556
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|