|
|
Joined: May 2006
Posts: 9
New Member
|
OP
New Member
Joined: May 2006
Posts: 9 |
I have a winchester 92 in both calibers and was wondering if anybody has a load for either. I am currently using an lyman 85 grain bullet mould with a gas check for my 32-20 and a 180 grain lead bullet for my 38-40. I am using IMR 4227 for both.
|
|
|
|
Joined: Apr 2003
Posts: 6,901
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2003
Posts: 6,901 |
Here's what my old (circa 1970) reloading book sez... just remember that while the SAME powders are still available, they are from DIFFERENT LOTS and their burning rates may vary somewhat... so proceed with "working up" your loads but BE CAREFUL and reduce these MAXIMUM LOADS by a full 10%... then "work up" carefuly while watching for pressure signs. Here is what my book has:
.32/40 LOADS
Bullet diameter (Jacketed or cast) .320� & .321� Maximum case length 2.130� Trim-to-Length 2.120� Max. Overall length (w/bullet) 2.500� Primer size Large rifle
TEST COMPONENTS: Remington cartridge cases Remington 9� primers Remington 170 grain H.P.C.L.
TEST (Velocity) SPECS. Firearm Used Winchester Mod. 94 Barrel Length 20� Twist 1 � 16 Groove Dia. .3205
170 GRAIN JACKETED (CAUTION: all loads are MAX. loads) 2400 � 15.0 grains � 1379 fps IMR4227 � 16.5 grains � 1348 fps IMR4198 � 22.0 grains � 1680 fps IMR3031 � 28.0 grains � 1845 fps IMR4895 � 30.0 grains � 1892 fps IMR4064 � 29.0 grains � 1745 fps Accuracy load: IMR4198 � 20.0 grains � 1422 fps Factory Duplication Load: IMR4198 � 18.8 grains � 1284 fps
.32/20 LOADS
Cartridge Specifications: Bullet Diameter, Jacketed = .310� Bullet Diameter Cast = .311� to .312� Maximum Case Length = 1.315� Trim-to-length = 1.305� Maximum Overall Length (with bullet) = 1.592�
Test Components: Cases = Winchester Primers = Remington 6� Firearm used = Savage Sporter Barrel Length = 24�� Twist = 1:20� Groove Diameter = .312�
80 GRAIN JACKETED BULLET Powder - Maximum Grains - Velocity IMR4227-------17.0* --------- 2260 fps Unique -------- 6.6 ----------- 1740 2400 ----------13.0 ----------- 1900 Accuracy load: 15.3 grains of IMR4227 = 2100 feet/per/second (fps) Factory Duplication Load: 15.2 grains of IMR4227 = 2080 fps * = Compressed load
91 GRAIN CAST BULLET W/ GAS CHECK Bullet #311419 (#2 Alloy) IMR4227 ------- 15.0 ------------ 2010 fps Unique ---------- 6.0 ------------- 1650 2400 ----------- 12.0 ------------- 1870 Accuracy Load: 15.0 grains IMR4227 = 2010 fps
100 GRAIN JACKETED BULLET IMR4227 -------- 15.0 ------------ 1985 fps Unique ----------- 6.0 ------------- 1475 2400 -------------11.5 ------------- 1700 Accuracy Load: 13.0 grains IMR4227 = 1720 fps Factory Duplication Load: 9.3 grains of 2400 = 1280 fps
115 GRAIN CAST BULLET W/GAS CHECK Bullet #311316 (#2 Alloy) IMR4227 --------- 14.0 ------------ 1865 fps Unique -------------5.0 ------------ 1385 2400 --------------11.0 ------------ 1685 Accuracy Load: 14.0 grains of IMR4227 = 1870 fps
Remember, all of these loads are MAXIMUM LOADS. You should reduce the maximum powder load by approximately 10% and slowly work up to the load you like to use with great CARE!
Strength & Honor�
Ron T.
|
|
|
|
510 members (219 Wasp, 219DW, 2500HD, 1badf350, 1936M71, 222Sako, 58 invisible),
2,457
guests, and
1,261
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,441
Posts18,489,474
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|